# Y-axis off, cleaning hits pad holder

**URL:** <https://forum.lulzbot.com/t/y-axis-off-cleaning-hits-pad-holder/6125>\
**Category:** LulzBot Mini\
**Created:** [August 28, 2018, 7:11pm UTC](https://forum.lulzbot.com/t/y-axis-off-cleaning-hits-pad-holder/6125 "2018-08-28T19:11:42Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![bneedhamia](https://avatars.discourse-cdn.com/v4/letter/b/51bf81/32.png) [@bneedhamia](https://forum.lulzbot.com/u/bneedhamia)\
**Post date:** [September 15, 2018, 4:14am UTC](https://forum.lulzbot.com/t/y-axis-off-cleaning-hits-pad-holder/6125/3 "2018-09-15T04:14:05Z")

</div>

Update: My Lulzbot Mini now successfully wipes the nozzle in the right place!

Yes, replacing the 1.0.3 Y axis motor mount plastic part with the 1.0.4 part and (importantly) installing that part according to the 1.0.4 instructions, fixed the problem for me! See my lengthy note on why, at [https://forum.lulzbot.com/t/y-axis-0-endstop-question/4486/8](https://forum.lulzbot.com/t/y-axis-0-endstop-question/4486/8)

One more tip about replacing that part: I posted a video of how to insert the heat-set inserts: [https://youtu.be/yZXz131e7fs](https://youtu.be/yZXz131e7fs) (the sound is pretty bad, so you might want to turn on the Captions).

---

_[View the full topic](https://forum.lulzbot.com/t/y-axis-off-cleaning-hits-pad-holder/6125)._