# Z-axis retraction after printing

**URL:** <https://forum.lulzbot.com/t/z-axis-retraction-after-printing/21533>\
**Category:** LulzBot Mini\
**Created:** [April 30, 2020, 2:05pm UTC](https://forum.lulzbot.com/t/z-axis-retraction-after-printing/21533 "2020-04-30T14:05:16Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![AdamB](https://avatars.discourse-cdn.com/v4/letter/a/b9bd4f/32.png) [@AdamB](https://forum.lulzbot.com/u/AdamB)\
**Post date:** [May 1, 2020, 9:03pm UTC](https://forum.lulzbot.com/t/z-axis-retraction-after-printing/21533/4 "2020-05-01T21:03:22Z")

</div>

Cannot say much about problems with the mini but the squished layers issue I am having with a brand new Workhorse. I’ve been trying to find an answer on this forum for days so its reassuring to hear I am not the only one.

I have re-leveled by bed using the corner shims described here: [SOLVED: Taz 6 auto leveling is \>0.5mm off (NOW PERFECT TO 0.01mm!)](https://forum.lulzbot.com/t/solved-taz-6-auto-leveling-is-0-5mm-off-now-perfect-to-0-01mm/6250)

Even went as far as to re-calibrate z-steps and e-steps. Still having squished layers, only now they occur a bit higher up the print, maybe an inch off the print bed. I hope someone has a fix for this soon. Starting to lose it!

---

_[View the full topic](https://forum.lulzbot.com/t/z-axis-retraction-after-printing/21533)._