# Z homing issues

**URL:** <https://forum.lulzbot.com/t/z-homing-issues/5670>\
**Category:** LulzBot TAZ\
**Created:** [March 1, 2018, 4:46am UTC](https://forum.lulzbot.com/t/z-homing-issues/5670 "2018-03-01T04:46:30Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![Gary](https://avatars.discourse-cdn.com/v4/letter/g/839c29/32.png) [@Gary](https://forum.lulzbot.com/u/Gary)\
**Post date:** [March 1, 2018, 4:46am UTC](https://forum.lulzbot.com/t/z-homing-issues/5670/1 "2018-03-01T04:46:30Z")

</div>

Hi guys.

I have a taz5 and have upgraded my firmware to 1.1.5.7. Now I am not allowed to home my Z unless the X and Y are homed as well. I use manual bed leveling what do I need to change to get the z to home where ever the x and y are?

Thanks in advance

Gary 😈😈😈

---

_[View the full topic](https://forum.lulzbot.com/t/z-homing-issues/5670)._