# Top **URL:** https://forum.lulzbot.com/top.md [Latest](https://forum.lulzbot.com/latest.md) · [Categories](https://forum.lulzbot.com/categories.md) --- ## [Lulzbot Taz 6 Biqu H2 issues](https://forum.lulzbot.com/t/lulzbot-taz-6-biqu-h2-issues/27785)
**Author:** [@Amber\_Watch99](https://forum.lulzbot.com/u/Amber_Watch99)\ **Replies:** 46\ **Last updated:** [July 30, 2026, 1:43am UTC](https://forum.lulzbot.com/t/lulzbot-taz-6-biqu-h2-issues/27785 "2026-07-30T01:43:51Z")
So I’ve been with the help of a redditor I met Making a Biqu H2 mod for my Taz 6 (following this here Lulzbot Taz - Biqu H2 Toolhead Mount by Wrathernaut | Download free STL model | Printables.com ) and I need some help…… --- ## [TAZ Pro S - M175v2 - E1 Error](https://forum.lulzbot.com/t/taz-pro-s-m175v2-e1-error/27794)
**Author:** [@Buckstop01](https://forum.lulzbot.com/u/Buckstop01)\ **Replies:** 24\ **Last updated:** [January 7, 2026, 2:36pm UTC](https://forum.lulzbot.com/t/taz-pro-s-m175v2-e1-error/27794 "2026-01-07T14:36:20Z")
I received the E1 error and noticed that a wire had broken off of my Heater Cartridge and needed to be replaced. I replaced the heater cartridge successfully and checked the connections through the wiring harness by usi… --- ## [Need help with my Taz 4 and Firmware](https://forum.lulzbot.com/t/need-help-with-my-taz-4-and-firmware/27844)
**Author:** [@cktechnology](https://forum.lulzbot.com/u/cktechnology)\ **Replies:** 22\ **Last updated:** [February 20, 2026, 12:52am UTC](https://forum.lulzbot.com/t/need-help-with-my-taz-4-and-firmware/27844 "2026-02-20T00:52:00Z")
Hi All, I have pulled my 11 year old taz 4 out from hibernation and i desperately want to get printing. I cleaned it all up, recalibrated, and it did some nice test prints. However, i downloaded the latest firmware from… --- ## [Taz 5 Poor Adhesion](https://forum.lulzbot.com/t/taz-5-poor-adhesion/27836)
**Author:** [@31cat](https://forum.lulzbot.com/u/31cat)\ **Replies:** 22\ **Last updated:** [January 27, 2026, 2:09pm UTC](https://forum.lulzbot.com/t/taz-5-poor-adhesion/27836 "2026-01-27T14:09:23Z")
Working with my Taz 5 that I inherited awhile back and running into issues. I replaced the PEI sheet and had good success with prints. I haven’t used the printer in a few months and just tried using it again. I got one g… --- ## [Auto level error at first washer, tried all recs here. Firmware?](https://forum.lulzbot.com/t/auto-level-error-at-first-washer-tried-all-recs-here-firmware/27918)
**Author:** [@erleichda](https://forum.lulzbot.com/u/erleichda)\ **Replies:** 15\ **Last updated:** [June 4, 2026, 11:13pm UTC](https://forum.lulzbot.com/t/auto-level-error-at-first-washer-tried-all-recs-here-firmware/27918 "2026-06-04T23:13:16Z")
I haven’t used my mini for a long time. I have a new Mac, downloaded most recent Cura from Lulzbot, then connect to and updated the firmware on my Mini. I reloaded filament and tested extrusion without issue. First print… --- ## [Taz Pro resale market](https://forum.lulzbot.com/t/taz-pro-resale-market/27875)
**Author:** [@g1ant405](https://forum.lulzbot.com/u/g1ant405)\ **Replies:** 10\ **Last updated:** [April 21, 2026, 2:51pm UTC](https://forum.lulzbot.com/t/taz-pro-resale-market/27875 "2026-04-21T14:51:56Z")
Is there still any resale market for a decent Taz Pro? I had to virtually give away a working Taz 6 recently because I needed the space. I’d hate to have to do the same with the Pro. --- ## [Mini 1 stops feeding after several layers](https://forum.lulzbot.com/t/mini-1-stops-feeding-after-several-layers/28043)
**Author:** [@jpilot56](https://forum.lulzbot.com/u/jpilot56)\ **Replies:** 13\ **Last updated:** [July 29, 2026, 5:01pm UTC](https://forum.lulzbot.com/t/mini-1-stops-feeding-after-several-layers/28043 "2026-07-29T17:01:01Z")
After some repairs in the last few weeks I printed a couple of 2 hour parts last night and they were perfect. I tried printing those exact parts today with no changes. The first 20-30 layers were great then the filament … --- ## [New to me Taz5 Two?](https://forum.lulzbot.com/t/new-to-me-taz5-two/27873)
**Author:** [@WhiteyMacfatson](https://forum.lulzbot.com/u/WhiteyMacfatson)\ **Replies:** 15\ **Last updated:** [March 29, 2026, 7:22pm UTC](https://forum.lulzbot.com/t/new-to-me-taz5-two/27873 "2026-03-29T19:22:19Z")
Hey all! I’ve got a little story before I get started. Today I picked up a little Taz 5 from my local library. They had reached out to anyone who wanted to help them get a new 3d printer and I walked over. So they had t… --- ## [Mini 2: Voron Klicky Probe for Z indexing?](https://forum.lulzbot.com/t/mini-2-voron-klicky-probe-for-z-indexing/27921)
**Author:** [@winstontj](https://forum.lulzbot.com/u/winstontj)\ **Replies:** 9\ **Last updated:** [July 21, 2026, 2:49pm UTC](https://forum.lulzbot.com/t/mini-2-voron-klicky-probe-for-z-indexing/27921 "2026-07-21T14:49:44Z")
My wife bought a Mini 2 recently. I put Klipper on it. It prints awesome except for the first layer. Is there a “bible” or “recipe” for a retractable Voron Klicky Probe style Z endstop at the bed (for bed leveling)? I w… --- ## [Heated bed stickin](https://forum.lulzbot.com/t/heated-bed-stickin/27839)
**Author:** [@LulzMini](https://forum.lulzbot.com/u/LulzMini)\ **Replies:** 9\ **Last updated:** [January 13, 2026, 10:27pm UTC](https://forum.lulzbot.com/t/heated-bed-stickin/27839 "2026-01-13T22:27:57Z")
I am having trouble getting the filament to stick to the heated bed. I have cleaned the bed with isopropyl alcohol and acetone, wet sanded the bed with 1,000 and 2,000 grit sandpaper, and applied purple glue to no avail… --- ## [Layer offset on 2 sides of calibration cube](https://forum.lulzbot.com/t/layer-offset-on-2-sides-of-calibration-cube/27905)
**Author:** [@ShawnHymel](https://forum.lulzbot.com/u/ShawnHymel)\ **Replies:** 11\ **Last updated:** [May 8, 2026, 12:51am UTC](https://forum.lulzbot.com/t/layer-offset-on-2-sides-of-calibration-cube/27905 "2026-05-08T00:51:49Z")
I have a Sidekick 747, and it recently started printing with layer offsets (see photos). When I printed a calibration cube, I noticed that the offsets were only on two of the faces (opposite the X and Y markings). I prin… --- ## [TAZ 6 Missing Leveling Washers](https://forum.lulzbot.com/t/taz-6-missing-leveling-washers/27917)
**Author:** [@maka](https://forum.lulzbot.com/u/maka)\ **Replies:** 9\ **Last updated:** [May 27, 2026, 8:53pm UTC](https://forum.lulzbot.com/t/taz-6-missing-leveling-washers/27917 "2026-05-27T20:53:04Z")
Hi! I’m getting this weird issue with a secondhand TAZ pro 6, the video is linked below. Essentially the nozzle is missing the right washers (around 4:00 in the video) and the print is aborted immediately after the back… --- ## [Looking for a donated RAMBo board for a TAZ 5](https://forum.lulzbot.com/t/looking-for-a-donated-rambo-board-for-a-taz-5/28109)
**Author:** [@joellee1488](https://forum.lulzbot.com/u/joellee1488)\ **Replies:** 15\ **Last updated:** [November 12, 2026, 6:37am UTC](https://forum.lulzbot.com/t/looking-for-a-donated-rambo-board-for-a-taz-5/28109 "2026-11-12T06:37:29Z")
Hey all. I’ve got a TAZ 5 that started beeping and slamming the gantry after I swapped in a new thermistor. Turns out the thermistor was never seated in the board header — it was just hanging loose. Now the board won’t t… --- ## [TAZ 6 Dual Extruder V3 Running 1.75mm Filament](https://forum.lulzbot.com/t/taz-6-dual-extruder-v3-running-1-75mm-filament/27806)
**Author:** [@Littlelocos](https://forum.lulzbot.com/u/Littlelocos)\ **Replies:** 6\ **Last updated:** [December 21, 2025, 3:13am UTC](https://forum.lulzbot.com/t/taz-6-dual-extruder-v3-running-1-75mm-filament/27806 "2025-12-21T03:13:58Z")
Hello All, I purchased a NOS Dual Extruder V3 and, after removing the original filament from factory testing, proceeded to modify it to run 1.75mm filament. This included making 2 new stainless steel heat breaks, reduc… --- ## [Mini 1 with Klipper](https://forum.lulzbot.com/t/mini-1-with-klipper/28050)
**Author:** [@masr1234](https://forum.lulzbot.com/u/masr1234)\ **Replies:** 0\ **Last updated:** [August 17, 2026, 8:48pm UTC](https://forum.lulzbot.com/t/mini-1-with-klipper/28050 "2026-08-17T20:48:59Z")
This is my mini 1 I got broken last year for 50 dollars with a dead mainboard. So I proceeded to swap it for skr mini e3 v3 and a Btt pi with Klipper. Then the tool head died so I made a clone of a M175 V2 with a mellow … --- ## [Mini 3, Moonraker and Klipper disconnecting issues](https://forum.lulzbot.com/t/mini-3-moonraker-and-klipper-disconnecting-issues/27847)
**Author:** [@SamanthaD](https://forum.lulzbot.com/u/SamanthaD)\ **Replies:** 6\ **Last updated:** [February 6, 2026, 10:20pm UTC](https://forum.lulzbot.com/t/mini-3-moonraker-and-klipper-disconnecting-issues/27847 "2026-02-06T22:20:46Z")
One of our library branches has the Mini 3 and out of the box it was working fine, not issues that was reported to me… However, I’m getting reports from that branch that the machine is having constant issues with Moonrak… --- ## [Disappearing sources for 2.85](https://forum.lulzbot.com/t/disappearing-sources-for-2-85/27848)
**Author:** [@CSW](https://forum.lulzbot.com/u/CSW)\ **Replies:** 4\ **Last updated:** [February 7, 2026, 7:02pm UTC](https://forum.lulzbot.com/t/disappearing-sources-for-2-85/27848 "2026-02-07T19:02:41Z")
I am wondering where folks are going to get 2.85 filament as more manufacturers are leaving that market. Most of the filaments in the Lulzbot store are Polymaker, and are fairly expensive. Polymaker has said they are n… --- ## [Showing off a Heavily Modified Taz 6 Dual Extruder V2](https://forum.lulzbot.com/t/showing-off-a-heavily-modified-taz-6-dual-extruder-v2/27796)
**Author:** [@Littlelocos](https://forum.lulzbot.com/u/Littlelocos)\ **Replies:** 5\ **Last updated:** [December 14, 2025, 6:20pm UTC](https://forum.lulzbot.com/t/showing-off-a-heavily-modified-taz-6-dual-extruder-v2/27796 "2025-12-14T18:20:43Z")
Here’s a blast from the past. A few years ago, I purchased a lightly used TAZ 6 with a Dual Extruder V2. I quickly found out about some of the issues and was determined to tame this beast. The attached photos show the… --- ## [Help with Taz6 and E3D Titan Aero Tool head](https://forum.lulzbot.com/t/help-with-taz6-and-e3d-titan-aero-tool-head/27787)
**Author:** [@TomsCables](https://forum.lulzbot.com/u/TomsCables)\ **Replies:** 7\ **Last updated:** [December 3, 2025, 2:39am UTC](https://forum.lulzbot.com/t/help-with-taz6-and-e3d-titan-aero-tool-head/27787 "2025-12-03T02:39:59Z")
Hello all, I have a new to me Taz6 with the V3 dually extruder. I am trying to upgrade this machine to a E3D Titan Aero hot end. Before switching the hot end I was successfully able to make a test print, so I know the… --- ## [Z-axis -- BLTouch issues](https://forum.lulzbot.com/t/z-axis-bltouch-issues/28047)
**Author:** [@mvmacpu](https://forum.lulzbot.com/u/mvmacpu)\ **Replies:** 7\ **Last updated:** [October 18, 2026, 9:30pm UTC](https://forum.lulzbot.com/t/z-axis-bltouch-issues/28047 "2026-10-18T21:30:11Z")
I have Mini 3 and after replacing the BLTouch the head doesn’t move close enough to printer bed for the BLTouch to make contact. Is there now something wrong with my geometry settings and it believes it bed should be cl… --- ## [Cura only slices to create a top layer](https://forum.lulzbot.com/t/cura-only-slices-to-create-a-top-layer/28031)
**Author:** [@SRHolland](https://forum.lulzbot.com/u/SRHolland)\ **Replies:** 8\ **Last updated:** [July 4, 2026, 6:42pm UTC](https://forum.lulzbot.com/t/cura-only-slices-to-create-a-top-layer/28031 "2026-07-04T18:42:39Z")
Cura 4.13.17 is only producing code for a top layer. I have used prev versions of cura on my Taz 6 with success and easily. I have tried the new software on multiple models (obj and stl). The models load fine and are… --- ## [Happy Holidays! Show off your prints](https://forum.lulzbot.com/t/happy-holidays-show-off-your-prints/27816)
**Author:** [@mattmon](https://forum.lulzbot.com/u/mattmon)\ **Replies:** 0\ **Last updated:** [December 20, 2025, 7:07pm UTC](https://forum.lulzbot.com/t/happy-holidays-show-off-your-prints/27816 "2025-12-20T19:07:42Z")
Anybody else use their lulzbots to fabricate holiday gifts? Let’s see em! I’ll start: This year, I made 8 vintage style stage lights: Here they are working together to do a light show. --- ## [Mini 1 autolevel issue after firmware update](https://forum.lulzbot.com/t/mini-1-autolevel-issue-after-firmware-update/28045)
**Author:** [@Hoju99](https://forum.lulzbot.com/u/Hoju99)\ **Replies:** 7\ **Last updated:** [August 8, 2026, 4:48pm UTC](https://forum.lulzbot.com/t/mini-1-autolevel-issue-after-firmware-update/28045 "2026-08-08T16:48:28Z")
I was given a mini 1 by a friend and successfully did a couple of prints. On connecting via usb to CuraLE I was notified of a firmware update as it had previously been connected via octoprint not direct After firmware … --- ## [Lulzbot Mini 1 Newbie Help](https://forum.lulzbot.com/t/lulzbot-mini-1-newbie-help/27889)
**Author:** [@GreenCanadian](https://forum.lulzbot.com/u/GreenCanadian)\ **Replies:** 2\ **Last updated:** [April 20, 2026, 8:36pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-newbie-help/27889 "2026-04-20T20:36:44Z")
Hello, I’m new to the 3d printer scene. I’ve purchased a second hand Lulzbot Mini 1. I’ve learned a great deal. However, my auto-leveling keeps failing. I managed to get a couple of prints to work… Mostly…. Now when I p… --- ## [Lulzbot Mini 1 nozzle part replacement](https://forum.lulzbot.com/t/lulzbot-mini-1-nozzle-part-replacement/27894)
**Author:** [@Eddieg](https://forum.lulzbot.com/u/Eddieg)\ **Replies:** 5\ **Last updated:** [May 6, 2026, 12:26am UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-nozzle-part-replacement/27894 "2026-05-06T00:26:24Z")
Hi guys. I have a Lulzbot mini 1 in 2026 and I need to find a nozzle replacement. I am new in 3 D print and I would like to know where can I find a replacement. with the correct specs. Any help is appreciated. Thanks --- ## [Need additional specs for Workhorse Z axis motors](https://forum.lulzbot.com/t/need-additional-specs-for-workhorse-z-axis-motors/28067)
**Author:** [@PurdueLib\_3D\_Lab](https://forum.lulzbot.com/u/PurdueLib_3D_Lab)\ **Replies:** 7\ **Last updated:** [November 12, 2026, 5:31am UTC](https://forum.lulzbot.com/t/need-additional-specs-for-workhorse-z-axis-motors/28067 "2026-11-12T05:31:47Z")
Greetings! We are trying to rehab two TAZ Workhorse printers and know they need new Z-axis motors. What we don’t know is what the motors’ voltage rating should be. Moon’s no longer has the specs for this model on its sit… --- ## [Taz 6 cannot produce a good print](https://forum.lulzbot.com/t/taz-6-cannot-produce-a-good-print/27883)
**Author:** [@maka](https://forum.lulzbot.com/u/maka)\ **Replies:** 5\ **Last updated:** [April 7, 2026, 8:10pm UTC](https://forum.lulzbot.com/t/taz-6-cannot-produce-a-good-print/27883 "2026-04-07T20:10:52Z")
Hello! I have a very old Taz 6 and no matter what I try, I cannot get a successful print. There are two things thats happen, either: Each layer of the print is slightly rotated from the last one, so instead of a strai… --- ## [Taz Dual Extruder Conductivity issue with one extruder](https://forum.lulzbot.com/t/taz-dual-extruder-conductivity-issue-with-one-extruder/28029)
**Author:** [@rtheo1229](https://forum.lulzbot.com/u/rtheo1229)\ **Replies:** 5\ **Last updated:** [July 6, 2026, 10:20pm UTC](https://forum.lulzbot.com/t/taz-dual-extruder-conductivity-issue-with-one-extruder/28029 "2026-07-06T22:20:12Z")
I have looked everywhere. I haven’t seen anything posted about a solution to this. I have cleaned the nozzles and the level washers. I know it’s a conductivity issue because I can get it to work if I put a piece of foil … --- ## [TAZ 5 Help - Extruders not working](https://forum.lulzbot.com/t/taz-5-help-extruders-not-working/27869)
**Author:** [@wwilson\_STEM](https://forum.lulzbot.com/u/wwilson_STEM)\ **Replies:** 6\ **Last updated:** [March 11, 2026, 12:08pm UTC](https://forum.lulzbot.com/t/taz-5-help-extruders-not-working/27869 "2026-03-11T12:08:07Z")
I received a TAZ 5 last year as a donation to my classroom. It had been working fine until about a month ago when I fried the board. Does anyone know of an idiot proof method to get it back to working properly? Everythin… --- ## [Btt skr mini e3 to Taz 6 installation](https://forum.lulzbot.com/t/btt-skr-mini-e3-to-taz-6-installation/27909)
**Author:** [@Pingus](https://forum.lulzbot.com/u/Pingus)\ **Replies:** 5\ **Last updated:** [June 5, 2026, 1:49pm UTC](https://forum.lulzbot.com/t/btt-skr-mini-e3-to-taz-6-installation/27909 "2026-06-05T13:49:34Z")
Hi, I just got a Taz 6 that has a bad motherboard so I bought the bigtreetech skr mini e3 and heard I’d have to repin the wires and I’ve never worked with printers before so I’m not sure how to do that. Anyone able to he… --- ## [Taz 6 SL Tool Head clicking when loading filament, tension issue?](https://forum.lulzbot.com/t/taz-6-sl-tool-head-clicking-when-loading-filament-tension-issue/27807)
**Author:** [@SamanthaD](https://forum.lulzbot.com/u/SamanthaD)\ **Replies:** 5\ **Last updated:** [December 16, 2025, 5:25pm UTC](https://forum.lulzbot.com/t/taz-6-sl-tool-head-clicking-when-loading-filament-tension-issue/27807 "2025-12-16T17:25:14Z")
After taking apart the SL Tool head to get some stuck filament out of it, we have been having issues with the tool head extruding while loading the filament. In a nutshell, we had some older filament snap inside the too… --- ## [New to printing with any device](https://forum.lulzbot.com/t/new-to-printing-with-any-device/27782)
**Author:** [@Daddyj76](https://forum.lulzbot.com/u/Daddyj76)\ **Replies:** 5\ **Last updated:** [November 26, 2025, 8:40pm UTC](https://forum.lulzbot.com/t/new-to-printing-with-any-device/27782 "2025-11-26T20:40:13Z")
Brand new to printing. Picked up a taz 6 running marlin? A lulzbot mini i 2 running marlin as well? Am I good with that? I know these are older units, but I am having a blast with them and can actually figure these out. … --- ## [Turn off Wipe sequence for TAZ Pro Dual](https://forum.lulzbot.com/t/turn-off-wipe-sequence-for-taz-pro-dual/27830)
**Author:** [@CorrectionOptimizer](https://forum.lulzbot.com/u/CorrectionOptimizer)\ **Replies:** 5\ **Last updated:** [January 27, 2026, 1:55pm UTC](https://forum.lulzbot.com/t/turn-off-wipe-sequence-for-taz-pro-dual/27830 "2026-01-27T13:55:24Z")
Does anyone know how to turn off the nozzle wiping function before the print starts the automatic bead leveling sequence? I’m assuming I need to change the code. I need to turn it off because it will always grind to a h… --- ## [Bioprinting using CureLE](https://forum.lulzbot.com/t/bioprinting-using-curele/28051)
**Author:** [@Senege](https://forum.lulzbot.com/u/Senege)\ **Replies:** 6\ **Last updated:** [August 24, 2026, 9:16pm UTC](https://forum.lulzbot.com/t/bioprinting-using-curele/28051 "2026-08-24T21:16:11Z")
Hi! I am using CureLE to slice structures that I print with a printess.org Bioprinter. Is there anyone on this quest? --- ## [Mini 1 prints first few layers then print comes off the bed](https://forum.lulzbot.com/t/mini-1-prints-first-few-layers-then-print-comes-off-the-bed/27877)
**Author:** [@camy16](https://forum.lulzbot.com/u/camy16)\ **Replies:** 2\ **Last updated:** [April 13, 2026, 10:57am UTC](https://forum.lulzbot.com/t/mini-1-prints-first-few-layers-then-print-comes-off-the-bed/27877 "2026-04-13T10:57:25Z")
Hi All My Mini 1 has been idol for about 10 years now as I was having issues with the print sticking to the bed. Recently I decided to try using it again and I replaced the PEI sheet thinking that was the problem. I pr… --- ## [Modern equivalent of Tilapia for 1.75?](https://forum.lulzbot.com/t/modern-equivalent-of-tilapia-for-1-75/27800)
**Author:** [@mattmon](https://forum.lulzbot.com/u/mattmon)\ **Replies:** 4\ **Last updated:** [December 14, 2025, 4:31am UTC](https://forum.lulzbot.com/t/modern-equivalent-of-tilapia-for-1-75/27800 "2025-12-14T04:31:30Z")
I have a small farm of TAZ 6 units. Looking for recommendations on modern 1.75mm extruders. Preferably something I can buy assembled and just bolt on. I really like the Tilapia extruder design. It’s truly a workhorse th… --- ## [TAZ Pro - Pro Dual Crashing](https://forum.lulzbot.com/t/taz-pro-pro-dual-crashing/27769)
**Author:** [@jemi](https://forum.lulzbot.com/u/jemi)\ **Replies:** 1\ **Last updated:** [November 13, 2025, 4:19pm UTC](https://forum.lulzbot.com/t/taz-pro-pro-dual-crashing/27769 "2025-11-13T16:19:12Z")
I am trying to run this printer for the first time. My printhead keeps crashing into the build plate and I wanted to see if anyone had any suggestions. I believe the issues is with selecting the tool head, I selected Pro… --- ## [Settings for TAZ6 with Polymaker Polylite ASA and 2.85 hexagon head?](https://forum.lulzbot.com/t/settings-for-taz6-with-polymaker-polylite-asa-and-2-85-hexagon-head/27904)
**Author:** [@ARhodes01075](https://forum.lulzbot.com/u/ARhodes01075)\ **Replies:** 4\ **Last updated:** [May 12, 2026, 12:12pm UTC](https://forum.lulzbot.com/t/settings-for-taz6-with-polymaker-polylite-asa-and-2-85-hexagon-head/27904 "2026-05-12T12:12:33Z")
I am looking for the settings to use for a TAZ6 using Polymaker Polylite ASA and 2.85 hexagon head. I have the original 2.85mm hotend and I cannot find an “official” printer profile for this. Can someone tell me the se… --- ## [Error:printer halted. kill() called!](https://forum.lulzbot.com/t/error-printer-halted-kill-called/27770)
**Author:** [@IHateThis](https://forum.lulzbot.com/u/IHateThis)\ **Replies:** 3\ **Last updated:** [November 13, 2025, 10:44pm UTC](https://forum.lulzbot.com/t/error-printer-halted-kill-called/27770 "2025-11-13T22:44:04Z")
Hi guys, I need help to fix this problem, I could find any solution anywhere. --- ## [Taz 6 BL-Touch help!](https://forum.lulzbot.com/t/taz-6-bl-touch-help/28025)
**Author:** [@kloudykatt](https://forum.lulzbot.com/u/kloudykatt)\ **Replies:** 3\ **Last updated:** [June 26, 2026, 2:00pm UTC](https://forum.lulzbot.com/t/taz-6-bl-touch-help/28025 "2026-06-26T14:00:12Z")
Hey yall, First Lulzbot printer of my own, got a Taz 6 for 100 bucks. The board that was inside the printer already was busted. Sounds like what happened is the heatsink had slipped and shorted out the Z-Axis driver, th… --- ## [Heater error TAZ 6](https://forum.lulzbot.com/t/heater-error-taz-6/27871)
**Author:** [@ARhodes01075](https://forum.lulzbot.com/u/ARhodes01075)\ **Replies:** 3\ **Last updated:** [April 20, 2026, 8:42pm UTC](https://forum.lulzbot.com/t/heater-error-taz-6/27871 "2026-04-20T20:42:52Z")
I have a TAZ 6 and it has the original Hexagon hot end with the original thermistor and heater. I was given a spool of old Polymaker PolyPlus PLA. It seemed to print a little poorly compared to PolyLite PL:A that I had… --- ## [Printing above 300c](https://forum.lulzbot.com/t/printing-above-300c/27859)
**Author:** [@tallstackdave](https://forum.lulzbot.com/u/tallstackdave)\ **Replies:** 3\ **Last updated:** [April 20, 2026, 8:59pm UTC](https://forum.lulzbot.com/t/printing-above-300c/27859 "2026-04-20T20:59:25Z")
I have some PPS-CF filament that I need to print on a lulzbot taz6 that was recently introduced to me. From what I can see these can print above 300c but all are “firmware” limited. We have a few parts that were bought f… --- ## [Taz5 Vertical Edges and accuracy](https://forum.lulzbot.com/t/taz5-vertical-edges-and-accuracy/27827)
**Author:** [@Vero](https://forum.lulzbot.com/u/Vero)\ **Replies:** 4\ **Last updated:** [January 2, 2026, 2:10pm UTC](https://forum.lulzbot.com/t/taz5-vertical-edges-and-accuracy/27827 "2026-01-02T14:10:55Z")
My TAZ 5 has been shut down for a couple of years and I am getting it back up and running. Its a tank! But i am having difficulties getting the print tuned back to what it was. Does anyone have suggestions on what erro… --- ## [STL files for the SE Toolhead](https://forum.lulzbot.com/t/stl-files-for-the-se-toolhead/28033)
**Author:** [@Bytesurfer](https://forum.lulzbot.com/u/Bytesurfer)\ **Replies:** 3\ **Last updated:** [July 2, 2026, 9:18pm UTC](https://forum.lulzbot.com/t/stl-files-for-the-se-toolhead/28033 "2026-07-02T21:18:56Z")
Are there any available STL print files for the SE Toolhead? I printed out the Taz 5/6 Universal Tool Head adapter. I have an E3D Titan Aero that I would like to use with the Taz 5 that I have been working on. Thanks. … --- ## [Taz 6 x axis not moving in negative](https://forum.lulzbot.com/t/taz-6-x-axis-not-moving-in-negative/27817)
**Author:** [@pyarbrough](https://forum.lulzbot.com/u/pyarbrough)\ **Replies:** 3\ **Last updated:** [December 27, 2025, 4:45pm UTC](https://forum.lulzbot.com/t/taz-6-x-axis-not-moving-in-negative/27817 "2025-12-27T16:45:19Z")
I have an old Taz 6 that I just added a BL touch to… but when I upgraded the firmware to the Drunken octopus it no longer homes the X axis…it doesn’t/won’t move on the positive (right)direction… it tries.. meaning you ca… --- ## [For sale SL tool head](https://forum.lulzbot.com/t/for-sale-sl-tool-head/27912)
**Author:** [@jpilot56](https://forum.lulzbot.com/u/jpilot56)\ **Replies:** 3\ **Last updated:** [May 17, 2026, 10:40pm UTC](https://forum.lulzbot.com/t/for-sale-sl-tool-head/27912 "2026-05-17T22:40:13Z")
When I started having problems with my 12-year-old Mini 1 I thought it was a good time to improve my capabilities. So I ordered the SL. Before it arrived I took the time to do some maintenance and check settings. Now it’… --- ## [Did Cura LE 4.x.x break my Mini ver.1?](https://forum.lulzbot.com/t/did-cura-le-4-x-x-break-my-mini-ver-1/27798)
**Author:** [@drumbliss](https://forum.lulzbot.com/u/drumbliss)\ **Replies:** 2\ **Last updated:** [December 8, 2025, 5:41pm UTC](https://forum.lulzbot.com/t/did-cura-le-4-x-x-break-my-mini-ver-1/27798 "2025-12-08T17:41:49Z")
After using the original Mini for years without any problems, I finally upgraded to Windows 11 from Windows 7. After installing Cura LE 4.13.17, it recognized the printer. It prompted me to upgrade the firmware which I d… --- ## [Lulzbot Taz 5 flexydually v2 printing problem](https://forum.lulzbot.com/t/lulzbot-taz-5-flexydually-v2-printing-problem/27870)
**Author:** [@tigershahkhan07](https://forum.lulzbot.com/u/tigershahkhan07)\ **Replies:** 3\ **Last updated:** [March 13, 2026, 1:17am UTC](https://forum.lulzbot.com/t/lulzbot-taz-5-flexydually-v2-printing-problem/27870 "2026-03-13T01:17:12Z")
Hey, I am having a very difficult time trying to print and ABS (230C) and Ninjaflex (230C) model without any support. I reached out to lulzbot support and they said they no longer help anyone with “legacy” models, so su… --- ## [M175v2 Extruder Gearing Issue?](https://forum.lulzbot.com/t/m175v2-extruder-gearing-issue/27919)
**Author:** [@Splangy](https://forum.lulzbot.com/u/Splangy)\ **Replies:** 4\ **Last updated:** [May 26, 2026, 3:37pm UTC](https://forum.lulzbot.com/t/m175v2-extruder-gearing-issue/27919 "2026-05-26T15:37:08Z")
Recently added a M175v2 toolhead to a TAZ 6 machine. I noticed that the extruder didn’t seem all that tight up against the rest of the toolhead. The nozzle is firm against the Bondtech extruder. The nozzle position varie… --- ## [Spliting a model into parts that with fit on the plate](https://forum.lulzbot.com/t/spliting-a-model-into-parts-that-with-fit-on-the-plate/28098)
**Author:** [@danaforgey](https://forum.lulzbot.com/u/danaforgey)\ **Replies:** 4\ **Last updated:** [November 11, 2026, 7:05pm UTC](https://forum.lulzbot.com/t/spliting-a-model-into-parts-that-with-fit-on-the-plate/28098 "2026-11-11T19:05:59Z")
So im trying to print a post-it template organizer. There are about 9 different pieces to the file but when I opened the file in the lulzbot edition of cura this is what I get. I obviously need to split it up but have n… [Next page](https://forum.lulzbot.com/top.md?page=1&per_page=50)