# Top **URL:** https://forum.lulzbot.com/top.md?page=1 [Latest](https://forum.lulzbot.com/latest.md) · [Categories](https://forum.lulzbot.com/categories.md) **Page:** 2 --- ## [How do I connect a lulzbot mini?](https://forum.lulzbot.com/t/how-do-i-connect-a-lulzbot-mini/28053)
**Author:** [@bob1](https://forum.lulzbot.com/u/bob1)\ **Replies:** 3\ **Last updated:** [November 12, 2026, 4:47pm UTC](https://forum.lulzbot.com/t/how-do-i-connect-a-lulzbot-mini/28053 "2026-11-12T16:47:48Z")
Hi, Someone has asked me to check a lulzbot mini, the printer info on the screen tells me it is a 2.1.3.0.45 I have no other info. It loos to run all the manual movements including bed leveling. I have downloaded and o… --- ## [Export profiles to excel](https://forum.lulzbot.com/t/export-profiles-to-excel/27828)
**Author:** [@dnoone38](https://forum.lulzbot.com/u/dnoone38)\ **Replies:** 2\ **Last updated:** [January 5, 2026, 2:59pm UTC](https://forum.lulzbot.com/t/export-profiles-to-excel/27828 "2026-01-05T14:59:08Z")
Is there a way to export the profiles from cura directly to excel? Or is there a way to change the file from .curaprofile to a .txt or csv? --- ## [M175v2 Tool Head - Heater Cartridge Replacement](https://forum.lulzbot.com/t/m175v2-tool-head-heater-cartridge-replacement/27776)
**Author:** [@Buckstop01](https://forum.lulzbot.com/u/Buckstop01)\ **Replies:** 2\ **Last updated:** [November 22, 2025, 11:32am UTC](https://forum.lulzbot.com/t/m175v2-tool-head-heater-cartridge-replacement/27776 "2025-11-22T11:32:11Z")
I need to change the heater cartridge on my M175v2 print head. I have successfully removed the heater cartridge from the heater block. What is the best way to remove the two connector pins from the wire connection harne… --- ## [Need help with my mini 1](https://forum.lulzbot.com/t/need-help-with-my-mini-1/27858)
**Author:** [@Beastchilly](https://forum.lulzbot.com/u/Beastchilly)\ **Replies:** 3\ **Last updated:** [February 21, 2026, 11:36pm UTC](https://forum.lulzbot.com/t/need-help-with-my-mini-1/27858 "2026-02-21T23:36:39Z")
every time I hit print in my mini 1 it would do this thing where the printing plate would move to the end and then start shaking and making this weird sound. It was like it was trying to move farther than it was supposed… --- ## [View G-code in progress](https://forum.lulzbot.com/t/view-g-code-in-progress/27910)
**Author:** [@jpilot56](https://forum.lulzbot.com/u/jpilot56)\ **Replies:** 2\ **Last updated:** [May 13, 2026, 1:29pm UTC](https://forum.lulzbot.com/t/view-g-code-in-progress/27910 "2026-05-13T13:29:55Z")
Is there a way to view G-code as printing is in progress? --- ## [Taz 6 z axis issue](https://forum.lulzbot.com/t/taz-6-z-axis-issue/27876)
**Author:** [@Zeroshin](https://forum.lulzbot.com/u/Zeroshin)\ **Replies:** 2\ **Last updated:** [April 2, 2026, 11:40am UTC](https://forum.lulzbot.com/t/taz-6-z-axis-issue/27876 "2026-04-02T11:40:33Z")
I am at my wits’ end. I’ve tried everything I could to prevent the z axis jamming and everything I tried that could make it work either seems to result in having the left side missing steps/microjamming and messing the z… --- ## [Why won't my Mini1 filament stick after replacing the heater](https://forum.lulzbot.com/t/why-wont-my-mini1-filament-stick-after-replacing-the-heater/27892)
**Author:** [@jpilot56](https://forum.lulzbot.com/u/jpilot56)\ **Replies:** 3\ **Last updated:** [April 27, 2026, 1:31pm UTC](https://forum.lulzbot.com/t/why-wont-my-mini1-filament-stick-after-replacing-the-heater/27892 "2026-04-27T13:31:20Z")
I replaced the silicone heater and now my Mini1 filament no longer sticks to the bed. I replaced it two years ago with no issues. Any suggestions? --- ## [Cura monitor Print not showing up?](https://forum.lulzbot.com/t/cura-monitor-print-not-showing-up/28048)
**Author:** [@cyankus](https://forum.lulzbot.com/u/cyankus)\ **Replies:** 2\ **Last updated:** [August 20, 2026, 8:04pm UTC](https://forum.lulzbot.com/t/cura-monitor-print-not-showing-up/28048 "2026-08-20T20:04:51Z")
why does’nt my printing show up on the --- ## [TAZ Pro use in 2026](https://forum.lulzbot.com/t/taz-pro-use-in-2026/27902)
**Author:** [@Librarian](https://forum.lulzbot.com/u/Librarian)\ **Replies:** 1\ **Last updated:** [May 1, 2026, 6:37pm UTC](https://forum.lulzbot.com/t/taz-pro-use-in-2026/27902 "2026-05-01T18:37:11Z")
Hi there, I’m a makerspace librarian that inherited an original TAZ Pro ‘standard’ model that no one has really been able to make work for 8ish years. My tech and I put in significant hours trying to test it months ago, … --- ## [What thermistor to use](https://forum.lulzbot.com/t/what-thermistor-to-use/27862)
**Author:** [@tallstackdave](https://forum.lulzbot.com/u/tallstackdave)\ **Replies:** 2\ **Last updated:** [February 28, 2026, 12:29am UTC](https://forum.lulzbot.com/t/what-thermistor-to-use/27862 "2026-02-28T00:29:07Z")
Hello, I am trying to replace my thermistor on my taz6 with a pt100, but don’t know what to buy. Does anything online work, are there different brands I need to buy from? Please let me know. --- ## [Kryon Max Filament barn find](https://forum.lulzbot.com/t/kryon-max-filament-barn-find/27907)
**Author:** [@Nozzle\_Necromancer](https://forum.lulzbot.com/u/Nozzle_Necromancer)\ **Replies:** 3\ **Last updated:** [May 11, 2026, 2:07pm UTC](https://forum.lulzbot.com/t/kryon-max-filament-barn-find/27907 "2026-05-11T14:07:25Z")
so I found a local deal with a Lulzbot mini and a bunch of Kryonmax filament. To be honest I have no need for any of it, but it seems like a good deal to resell if anyone will actually buy the stuff. I’m talking 4.5k… --- ## [Taz 6x auto home failure with new M1 75 V2 help](https://forum.lulzbot.com/t/taz-6x-auto-home-failure-with-new-m1-75-v2-help/27897)
**Author:** [@Curtismcc76](https://forum.lulzbot.com/u/Curtismcc76)\ **Replies:** 3\ **Last updated:** [April 30, 2026, 1:50pm UTC](https://forum.lulzbot.com/t/taz-6x-auto-home-failure-with-new-m1-75-v2-help/27897 "2026-04-30T13:50:28Z")
Was given a tax 6 and included was a new M175 V2 print head. Upon looking through all the print heads, it looked like the cleanest one to start with. I have thus gone through and installed the print head with the adapter… --- ## [Taz 8 Diagnostic Function](https://forum.lulzbot.com/t/taz-8-diagnostic-function/28107)
**Author:** [@Mechanic](https://forum.lulzbot.com/u/Mechanic)\ **Replies:** 6\ **Last updated:** [November 2, 2026, 2:42pm UTC](https://forum.lulzbot.com/t/taz-8-diagnostic-function/28107 "2026-11-02T14:42:24Z")
Hello, Is there a way I can find out why the TAZ 8 printer stops in mid print? I am running a TAZ 8 at my work and at times I need to print overnight. Sometimes the printer stops mid print, and the display does not sho… --- ## [Having issues loading materials into Cura LE 4.13.17](https://forum.lulzbot.com/t/having-issues-loading-materials-into-cura-le-4-13-17/28038)
**Author:** [@doytow](https://forum.lulzbot.com/u/doytow)\ **Replies:** 1\ **Last updated:** [July 20, 2026, 6:31pm UTC](https://forum.lulzbot.com/t/having-issues-loading-materials-into-cura-le-4-13-17/28038 "2026-07-20T18:31:05Z")
Only Polylite PLA shows up in my materials even though many others are in the folder. Can’t seem to add any to favorites, even though others say they have imported successfully --- ## [Problem with temperature tower- PLA](https://forum.lulzbot.com/t/problem-with-temperature-tower-pla/27908)
**Author:** [@ARhodes01075](https://forum.lulzbot.com/u/ARhodes01075)\ **Replies:** 2\ **Last updated:** [May 17, 2026, 10:01pm UTC](https://forum.lulzbot.com/t/problem-with-temperature-tower-pla/27908 "2026-05-17T22:01:46Z")
I printed a temperature tower to try to determine the best settings for a new reel of Polymaker Polylite PLA. In the photo, the temperature starts at 230 degrees on the bottom step and drops 5 degrees with ea… --- ## [Mini 2 Bed Thermistor Blues](https://forum.lulzbot.com/t/mini-2-bed-thermistor-blues/27852)
**Author:** [@biomurph](https://forum.lulzbot.com/u/biomurph)\ **Replies:** 2\ **Last updated:** [February 10, 2026, 9:52pm UTC](https://forum.lulzbot.com/t/mini-2-bed-thermistor-blues/27852 "2026-02-10T21:52:05Z")
Hi! I have had a Mini 2 since about the time they came out. Super reliable, a real joy to run. However, I am now having the bed thermistor problem that so many have had before https://forum.lulzbot.com/t/thermistor-go… --- ## [Free Taz 3.0 printer and spools](https://forum.lulzbot.com/t/free-taz-3-0-printer-and-spools/28027)
**Author:** [@Zoelda13](https://forum.lulzbot.com/u/Zoelda13)\ **Replies:** 1\ **Last updated:** [September 29, 2026, 12:08pm UTC](https://forum.lulzbot.com/t/free-taz-3-0-printer-and-spools/28027 "2026-09-29T12:08:06Z")
In PDX Oregon area. Has new bed. Very Lightly used, but not sure it’s working. Might be good for parts. Have multiple spools of filament too. all free! --- ## [Printing PPS-CF on Taz6](https://forum.lulzbot.com/t/printing-pps-cf-on-taz6/27860)
**Author:** [@tallstackdave](https://forum.lulzbot.com/u/tallstackdave)\ **Replies:** 1\ **Last updated:** [February 23, 2026, 8:23pm UTC](https://forum.lulzbot.com/t/printing-pps-cf-on-taz6/27860 "2026-02-23T20:23:09Z")
Can you print PPS-CF on the Taz6, and If so what modifications do I need to make to the printer to print this. I have already heard about the e3d pt100 thermistor, but what other software/firmware, and hardware modificat… --- ## [New Ball Bearings For my Taz 6](https://forum.lulzbot.com/t/new-ball-bearings-for-my-taz-6/27867)
**Author:** [@Holdenthlion13](https://forum.lulzbot.com/u/Holdenthlion13)\ **Replies:** 1\ **Last updated:** [April 20, 2026, 8:46pm UTC](https://forum.lulzbot.com/t/new-ball-bearings-for-my-taz-6/27867 "2026-04-20T20:46:20Z")
I got some new ball bearings for my Taz 6 y-axis but I come to find that the inner diameter is larger than the rod. I might be able to rotate the bearings so the balls can ride on the rod. Does anyone have any ideas? --- ## [Z axis wiring harness for Mini 2?](https://forum.lulzbot.com/t/z-axis-wiring-harness-for-mini-2/27878)
**Author:** [@mhristau](https://forum.lulzbot.com/u/mhristau)\ **Replies:** 1\ **Last updated:** [March 28, 2026, 2:55pm UTC](https://forum.lulzbot.com/t/z-axis-wiring-harness-for-mini-2/27878 "2026-03-28T14:55:21Z")
Is a replacement still available? Can’t find online… --- ## [Lulzbot Taz Workhorse X axis alignment off](https://forum.lulzbot.com/t/lulzbot-taz-workhorse-x-axis-alignment-off/27864)
**Author:** [@kevinL](https://forum.lulzbot.com/u/kevinL)\ **Replies:** 2\ **Last updated:** [February 28, 2026, 12:45am UTC](https://forum.lulzbot.com/t/lulzbot-taz-workhorse-x-axis-alignment-off/27864 "2026-02-28T00:45:41Z")
I’ve been seeing an issue where the head of my printer seems to be moving the whole head slightly diaganol when moving the x axis in either direction. I’m wondering if anyones knows why this is happening or if there is … --- ## [My prints have become off kilter](https://forum.lulzbot.com/t/my-prints-have-become-off-kilter/27823)
**Author:** [@Kevmanha55](https://forum.lulzbot.com/u/Kevmanha55)\ **Replies:** 1\ **Last updated:** [December 30, 2025, 3:28am UTC](https://forum.lulzbot.com/t/my-prints-have-become-off-kilter/27823 "2025-12-30T03:28:57Z")
So my Taz 6 started making an odd “skipping” noise when starring my prints. When the head moves from each point, no problem. It’s only when the calibration is done and the actual print is starting. The starring point is … --- ## [What to do with an old well-loved Taz2 and loads of 2.85mm filament?](https://forum.lulzbot.com/t/what-to-do-with-an-old-well-loved-taz2-and-loads-of-2-85mm-filament/27786)
**Author:** [@issackelly](https://forum.lulzbot.com/u/issackelly)\ **Replies:** 1\ **Last updated:** [November 28, 2025, 2:59pm UTC](https://forum.lulzbot.com/t/what-to-do-with-an-old-well-loved-taz2-and-loads-of-2-85mm-filament/27786 "2025-11-28T14:59:54Z")
Hello Lulzbot community. I bought a Taz2 in 2013. I’ve used it a few times a month ever since and I finally upgraded my printer. Thing is, I have no idea what to do with my old one. It’s well used, and could probably use… --- ## [Taz Pro: Trying to Swap Dual Ex to SE Toolhead (from modified Dual Ex)](https://forum.lulzbot.com/t/taz-pro-trying-to-swap-dual-ex-to-se-toolhead-from-modified-dual-ex/28091)
**Author:** [@Librarian](https://forum.lulzbot.com/u/Librarian)\ **Replies:** 2\ **Last updated:** [September 29, 2026, 6:31pm UTC](https://forum.lulzbot.com/t/taz-pro-trying-to-swap-dual-ex-to-se-toolhead-from-modified-dual-ex/28091 "2026-09-29T18:31:23Z")
Hello, With resources from this message board, I was able to print the parts I needed to modify one of the dual extruder heads to become a new single SE toolhead. Now, however, I’m stuck on how to attach this new SE bac… --- ## [Taz Pro Homing failed](https://forum.lulzbot.com/t/taz-pro-homing-failed/27781)
**Author:** [@m.davidson](https://forum.lulzbot.com/u/m.davidson)\ **Replies:** 1\ **Last updated:** [November 21, 2025, 6:21pm UTC](https://forum.lulzbot.com/t/taz-pro-homing-failed/27781 "2025-11-21T18:21:15Z")
we have a lulzbot taz pro that was printing fine but all the sudden it started showing "Homing Failed, PRINTER HALTED, Please Reset” I normally set prints up in cura and put on a flash drive. even if I hit the “home al… --- ## [After installing Meteor 1.75 misses the wiper](https://forum.lulzbot.com/t/after-installing-meteor-1-75-misses-the-wiper/28103)
**Author:** [@chetc](https://forum.lulzbot.com/u/chetc)\ **Replies:** 3\ **Last updated:** [October 31, 2026, 8:57pm UTC](https://forum.lulzbot.com/t/after-installing-meteor-1-75-misses-the-wiper/28103 "2026-10-31T20:57:02Z")
I changed out the toolhead updated software, chose Meteor 1.75 in Marvin LCD panel.Set up correct toolhead in Cura. Now it wipes nozzle just behind the pad. HELP --- ## [Lulzbot Sidekick 747 keeps parking](https://forum.lulzbot.com/t/lulzbot-sidekick-747-keeps-parking/28054)
**Author:** [@AndrewH](https://forum.lulzbot.com/u/AndrewH)\ **Replies:** 1\ **Last updated:** [August 24, 2026, 7:06pm UTC](https://forum.lulzbot.com/t/lulzbot-sidekick-747-keeps-parking/28054 "2026-08-24T19:06:09Z")
Every time I try and start a print it will auto pause/ park, when I press the button for it to continue it just parks again. Is there any way to solve this? It’s on version 2.1.3.0.48 --- ## [Printer connection error after firmware update](https://forum.lulzbot.com/t/printer-connection-error-after-firmware-update/27856)
**Author:** [@Cserrano22](https://forum.lulzbot.com/u/Cserrano22)\ **Replies:** 1\ **Last updated:** [February 15, 2026, 2:07am UTC](https://forum.lulzbot.com/t/printer-connection-error-after-firmware-update/27856 "2026-02-15T02:07:48Z")
Updated the lulzbot mini2 to have the most current firmware from the 3.6.37 Cura LE software. I followed the instructions online but I am getting this error. Does anyone know what this means? --- ## [PETg stuck in filament guide path. Are replacement parts available?](https://forum.lulzbot.com/t/petg-stuck-in-filament-guide-path-are-replacement-parts-available/27861)
**Author:** [@ja-sf](https://forum.lulzbot.com/u/ja-sf)\ **Replies:** 1\ **Last updated:** [February 25, 2026, 12:20am UTC](https://forum.lulzbot.com/t/petg-stuck-in-filament-guide-path-are-replacement-parts-available/27861 "2026-02-25T00:20:59Z")
Hello, PETg got stuck in my printer, and nothing was helping it get loose so I disassembled it and pushed all of the parts out. but the filament seems to have fused with the filament guide path (on OHAI the part is call… --- ## [LuLzBot Taz Workhorse](https://forum.lulzbot.com/t/lulzbot-taz-workhorse/27814)
**Author:** [@pbhatia](https://forum.lulzbot.com/u/pbhatia)\ **Replies:** 1\ **Last updated:** [December 19, 2025, 8:13pm UTC](https://forum.lulzbot.com/t/lulzbot-taz-workhorse/27814 "2025-12-19T20:13:52Z")
Hello all, I’m new to 3D printing and working with a LulzBot TAZ Workhorse. My issue is that the printer completes only one print job and then stops, with no filament extrusion afterward. I’ve tried changing the filament… --- ## [OpenRailz X Y Z n Anti-Wobble Revival - TAZ 5 - Glorious!](https://forum.lulzbot.com/t/openrailz-x-y-z-n-anti-wobble-revival-taz-5-glorious/27845)
**Author:** [@entity-unknown](https://forum.lulzbot.com/u/entity-unknown)\ **Replies:** 0\ **Last updated:** [January 27, 2026, 4:32pm UTC](https://forum.lulzbot.com/t/openrailz-x-y-z-n-anti-wobble-revival-taz-5-glorious/27845 "2026-01-27T16:32:16Z")
It’s been over 10 years since I bought my TAZ 5 and it was at the same time PierceT was creating the OpenRailz system. I was very interested in the project but I wasn’t gutting a new printer especially since you need a p… --- ## [Taz 4 nozzle heating issues](https://forum.lulzbot.com/t/taz-4-nozzle-heating-issues/28001)
**Author:** [@eknaknak](https://forum.lulzbot.com/u/eknaknak)\ **Replies:** 1\ **Last updated:** [June 2, 2026, 1:48am UTC](https://forum.lulzbot.com/t/taz-4-nozzle-heating-issues/28001 "2026-06-02T01:48:22Z")
I am trying to set up an old Taz 4 printer that has not been in operation for a while. I am quite inexperienced with 3D printers. The nozzle has difficulty heating beyond 170 degrees celsius. It takes a while to get up … --- ## [Causes of persistent nozzle leaks on an old Mini 1](https://forum.lulzbot.com/t/causes-of-persistent-nozzle-leaks-on-an-old-mini-1/28028)
**Author:** [@jpilot56](https://forum.lulzbot.com/u/jpilot56)\ **Replies:** 1\ **Last updated:** [June 23, 2026, 1:04pm UTC](https://forum.lulzbot.com/t/causes-of-persistent-nozzle-leaks-on-an-old-mini-1/28028 "2026-06-23T13:04:30Z")
What might cause filament to build up on the nozzle while printing? It has the appearance of a leak. It’s been happening on every print, no matter how well I clean the nozzle. Am I just not doing a good enough job? This … --- ## [Taz 5 flexydually v2 print with only Flex](https://forum.lulzbot.com/t/taz-5-flexydually-v2-print-with-only-flex/27911)
**Author:** [@tigershahkhan07](https://forum.lulzbot.com/u/tigershahkhan07)\ **Replies:** 1\ **Last updated:** [May 14, 2026, 9:00pm UTC](https://forum.lulzbot.com/t/taz-5-flexydually-v2-print-with-only-flex/27911 "2026-05-14T21:00:56Z")
Hey, is there anyway someone can print using just the front nozzle, it keeps printing on the rear nozzle. So far I have tried to print switching the nozzle to 1 on the manage printer, also printing with just the front n… --- ## [Broken nozzle in Taz 5](https://forum.lulzbot.com/t/broken-nozzle-in-taz-5/28015)
**Author:** [@Liv](https://forum.lulzbot.com/u/Liv)\ **Replies:** 1\ **Last updated:** [June 9, 2026, 12:17am UTC](https://forum.lulzbot.com/t/broken-nozzle-in-taz-5/28015 "2026-06-09T00:17:46Z")
I was given a Taz 5 by an incredible friend about a year or so ago and only now I ventured myself on turning it on and all that jazz. The extruder seemed to be completely blocked and after researching a bit, it was sugg… --- ## [Weirdest Z home failure yet (SOLVED, but still an issue)](https://forum.lulzbot.com/t/weirdest-z-home-failure-yet-solved-but-still-an-issue/28044)
**Author:** [@Amber\_Watch99](https://forum.lulzbot.com/u/Amber_Watch99)\ **Replies:** 0\ **Last updated:** [August 2, 2026, 10:01pm UTC](https://forum.lulzbot.com/t/weirdest-z-home-failure-yet-solved-but-still-an-issue/28044 "2026-08-02T22:01:57Z")
So I recently modified my Taz 6 with a Biqu H2 toolhead (thanks to Wrathernaut for the assistance) and i have necountered a rather peculiar issue. kinda… So i was doing test prints and everything seemed fine, until it w… --- ## [Replacement thermostat for flexydually v2](https://forum.lulzbot.com/t/replacement-thermostat-for-flexydually-v2/28014)
**Author:** [@tigershahkhan07](https://forum.lulzbot.com/u/tigershahkhan07)\ **Replies:** 1\ **Last updated:** [June 7, 2026, 2:32am UTC](https://forum.lulzbot.com/t/replacement-thermostat-for-flexydually-v2/28014 "2026-06-07T02:32:14Z")
Hey could someone please tell me if a 100 Semitec gt-2 thermostat is compatible with my flexydually v2 tool head? Thanks --- ## [TAZ 6 How to edit skew compinsation](https://forum.lulzbot.com/t/taz-6-how-to-edit-skew-compinsation/27831)
**Author:** [@dnoone38](https://forum.lulzbot.com/u/dnoone38)\ **Replies:** 1\ **Last updated:** [January 7, 2026, 11:50pm UTC](https://forum.lulzbot.com/t/taz-6-how-to-edit-skew-compinsation/27831 "2026-01-07T23:50:00Z")
I have a taz 6 with marlin firmware 2.0.0.144.1. Does anyone know how to edit the skew compensation? I tried entering m852 but I got a message saying it was an unknown command. --- ## [Extruder fan connection on Taz5](https://forum.lulzbot.com/t/extruder-fan-connection-on-taz5/27853)
**Author:** [@Joval](https://forum.lulzbot.com/u/Joval)\ **Replies:** 1\ **Last updated:** [February 11, 2026, 10:09pm UTC](https://forum.lulzbot.com/t/extruder-fan-connection-on-taz5/27853 "2026-02-11T22:09:29Z")
I have an early Taz 2 or 3 That was updated several times and when switched on it describes itself as a “Taz 5 SE 0.5mm aeroV2 Lulzbot.com v1.1.9.34” It is fitted with a “ Rambo rev 1.2e control board”. I have fitted a … --- ## [Firmware version website vs Cura](https://forum.lulzbot.com/t/firmware-version-website-vs-cura/27788)
**Author:** [@TomsCables](https://forum.lulzbot.com/u/TomsCables)\ **Replies:** 0\ **Last updated:** [November 25, 2025, 5:54pm UTC](https://forum.lulzbot.com/t/firmware-version-website-vs-cura/27788 "2025-11-25T17:54:02Z")
Question, when updating my firmware to 2.0.9X I can find the hex file under the Taz 6 folder under the Cura 4.13.17 install directory. I can also find it on Gitlabs 2.0.9.0.13 for the TAZ6 and Workhorse (65cc7ed1) · C… --- ## [Fictional Phone Mockup](https://forum.lulzbot.com/t/fictional-phone-mockup/28042)
**Author:** [@ReginaFabricam](https://forum.lulzbot.com/u/ReginaFabricam)\ **Replies:** 0\ **Last updated:** [July 24, 2026, 2:49am UTC](https://forum.lulzbot.com/t/fictional-phone-mockup/28042 "2026-07-24T02:49:27Z")
I have been playing Tomodachi Life on the Switch. In the game, you take care of an island with custom made characters living on it. You can give them custom made treasures. I made a smartphone for my islanders. The phon… --- ## [TAZ 5 setting z axis home too low](https://forum.lulzbot.com/t/taz-5-setting-z-axis-home-too-low/27784)
**Author:** [@ggnagy](https://forum.lulzbot.com/u/ggnagy)\ **Replies:** 1\ **Last updated:** [November 26, 2025, 8:24pm UTC](https://forum.lulzbot.com/t/taz-5-setting-z-axis-home-too-low/27784 "2025-11-26T20:24:19Z")
I dug out my old TAZ 5 and was trying to get it printing again. I updated the firmware to v1.1.9.34 and replaced the nozzle to clear a clog. It printed fine with PLA, and then I switched to ABS. Once I did, when running… --- ## [Firmware update](https://forum.lulzbot.com/t/firmware-update/28080)
**Author:** [@gabriellemdek](https://forum.lulzbot.com/u/gabriellemdek)\ **Replies:** 0\ **Last updated:** [September 20, 2026, 1:35am UTC](https://forum.lulzbot.com/t/firmware-update/28080 "2026-09-20T01:35:32Z")
I have a Lulzbot TAZ workhorse. It was donated to our small school and last updated in 2022. Its installed firmware version is 2.0.9.0.13. I can not get Cura LE 4.13.17 to recognize the printer due to the outdated firmwa… --- ## [Latest Cura support for Mac OS High Sierra](https://forum.lulzbot.com/t/latest-cura-support-for-mac-os-high-sierra/27896)
**Author:** [@jpilot56](https://forum.lulzbot.com/u/jpilot56)\ **Replies:** 0\ **Last updated:** [April 27, 2026, 5:29am UTC](https://forum.lulzbot.com/t/latest-cura-support-for-mac-os-high-sierra/27896 "2026-04-27T05:29:40Z")
My old Mac is stuck on High Sierra - OS 10.13.6 and cannot be updated. What is the latest version of Cura that will run here? I’ve been using 3.6.20 with no problems but I’m interested in newer versions. Thanks --- ## [Lulzbot mini 1 issues](https://forum.lulzbot.com/t/lulzbot-mini-1-issues/27837)
**Author:** [@Eddieg](https://forum.lulzbot.com/u/Eddieg)\ **Replies:** 0\ **Last updated:** [January 11, 2026, 6:57pm UTC](https://forum.lulzbot.com/t/lulzbot-mini-1-issues/27837 "2026-01-11T18:57:00Z")
Hi. I got a Lulzbot mini 1 and a MacBook air with Sonoma update. Does anyone know how to make it work. --- ## [Travel limits TAZ 3](https://forum.lulzbot.com/t/travel-limits-taz-3/27792)
**Author:** [@eears](https://forum.lulzbot.com/u/eears)\ **Replies:** 1\ **Last updated:** [November 30, 2025, 4:35am UTC](https://forum.lulzbot.com/t/travel-limits-taz-3/27792 "2025-11-30T04:35:55Z")
I have a TAZ 3 that I recently replaced the bed on. They no longer make the original hardware, so I had to purchase a 12V equivalent from another manufacturer. It works fine, but it’s larger and I would like to use thi… --- ## [Add GLCD to early Lulzbot Mini](https://forum.lulzbot.com/t/add-glcd-to-early-lulzbot-mini/28073)
**Author:** [@LulzbotMini1](https://forum.lulzbot.com/u/LulzbotMini1)\ **Replies:** 0\ **Last updated:** [September 14, 2026, 9:21pm UTC](https://forum.lulzbot.com/t/add-glcd-to-early-lulzbot-mini/28073 "2026-09-14T21:21:29Z")
I have a Lulzbot Mini and was wondering if anyone has had success adding a reprapdiscount 12864 display to the original mini rambo board found in early minis? I know it doesn’t have the display headers from factory, but… --- ## [Extremely rapid bed moves](https://forum.lulzbot.com/t/extremely-rapid-bed-moves/27906)
**Author:** [@jpilot56](https://forum.lulzbot.com/u/jpilot56)\ **Replies:** 0\ **Last updated:** [May 8, 2026, 2:08am UTC](https://forum.lulzbot.com/t/extremely-rapid-bed-moves/27906 "2026-05-08T02:08:57Z")
I installed the SL tool head on my Mini1 and the bed now shakes very much when printing “micro” XY moves. The model sticks for a few layers but eventually the tiny rapid moves cause the model to break free from the bed. … --- ## [Free TAZ 3.0 for parts](https://forum.lulzbot.com/t/free-taz-3-0-for-parts/27895)
**Author:** [@Zoelda13](https://forum.lulzbot.com/u/Zoelda13)\ **Replies:** 0\ **Last updated:** [April 26, 2026, 8:02pm UTC](https://forum.lulzbot.com/t/free-taz-3-0-for-parts/27895 "2026-04-26T20:02:56Z")
Hey there! We have an Lulzbot TAZ 3.0 that I think has a good frame, good parts… it got knocked over and we replaced the bed… but never was quite right. Would be happy to give it to someone “as is” for free rather than … --- ## [TAZ PRO S: STOP BLTouch error (I don't have BLTouch)](https://forum.lulzbot.com/t/taz-pro-s-stop-bltouch-error-i-dont-have-bltouch/28112)
**Author:** [@Librarian](https://forum.lulzbot.com/u/Librarian)\ **Replies:** 1\ **Last updated:** [November 5, 2026, 9:51pm UTC](https://forum.lulzbot.com/t/taz-pro-s-stop-bltouch-error-i-dont-have-bltouch/28112 "2026-11-05T21:51:01Z")
My TAZ Pro S does NOT have BLTouch, I did not enable it in Cura, and yet it is still bricking my printer. I have just (mostly) successfully re-purposed one of the TAZ Pro Dual Extruder heads into a Single Extruder. I wi… [Previous page](https://forum.lulzbot.com/top.md?per_page=50) [Next page](https://forum.lulzbot.com/top.md?page=2&per_page=50)