Default ABS Medium 0 0.5 0 0.5 0.97 1 1 0 0 1800 0 0.2 0 5 0 0.24 3 3 2 0 1 0 0 300 0 0 100 100 0.5 0 0 3 3 0.14 85 0 1 0 1 6 0 0 999 12 7 1 0 999 2 1 1 30 1 0 Rectilinear Rectilinear 20 15 100 5 1 45,-45 0 0 0 30 0 0 70 1 0.3 1 1 0 4 45 0 0 0 0 0 1 0 1 15 10 0 45 100 0 100 1 0 1 0 0 1 0 0 0 0.09 1 0 290 275 250 0 0 0 -1 -1 -1 1 -1 1 0,0|0,0|0,0|0,0|0,0|0,0 1 RepRap (Marlin/Repetier/Sprinter) r2 115200 0 ;Sliced at: {day} {date} {time},;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density},;Print time: {print_time},;Filament used: {filament_amount}m {filament_weight}g,;Filament cost: {filament_cost},;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line,;M109 S{print_temperature} ;Uncomment to add your own temperature line,G21 ;metric values,G90 ;absolute positioning,M82 ;set extruder to absolute mode,M107 ;start with the fan off,G28 X0 Y0 ;move X/Y to min endstops,G28 Z0 ;move Z to min endstops,G1 Z15.0 F{travel_speed};move the platform down 15mm,G92 E0 ; zero the extruded length,G1 F200 E0 ; extrude 3mm of feed stock,G92 E0 ; zero the extruded length again,G1 F{travel_speed} ; set travel speed,M203 X192 Y208 Z3 ; speed limits,M117 Printing... ; send message to LCD M400,M104 S0 ; hotend off,M140 S0 ; heated bed heater off (if you have it),M107 ; fans off,G91 ; relative positioning,G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure,G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more,G90 ; absolute positioning,G1 X0 Y250 ; move to cooling position,M84 ; steppers off,G90 ; absolute positioning,M117 TAZ Ready.,;{profile_string} 0 0 Random Song 0 3600 0.5 0.8 0.8 4800 1002 50 0 1 1 2.86 24 1.25 0 0.09 0 0 0 20 1 0 1 1 0 3 0 1 0 3 12 -0.5 600 1 10 0 190 60 0.9 225 110 0.97 195 80 1 220 80 1 0.3 3 3 1 15 25 0.24 3 3 1 20 30 0.1 4 4 2 30 40