Page 41 of 41

Re: Adding an Openbuilds Openrail x axis to a Lulzbot Taz 4/5

Posted: Sun Feb 12, 2017 6:28 pm
by catzcradle
Ah, thanks

Re: Adding an Openbuilds Openrail x axis to a Lulzbot Taz 4/5

Posted: Tue Feb 14, 2017 1:05 pm
by catzcradle
lives.jpg


It lives! Thanks for the write up Piercet. It may of just been me, but on the x axis parts, specifically the motor block, and idler parts, the 10mm bolts were too short to get a t-nut to work on. I just remodeled the parts to make the holes a bit deeper, but everything works great!