Budaschnozzle fan duct...

Want to use the Open Source Hardware documentation to make your LulzBot 3D Printer do even more? Start here!
Post Reply
geneb
Posts: 63
Joined: Thu May 02, 2013 7:59 am

Budaschnozzle fan duct...

Post by geneb » Sat Nov 30, 2013 9:29 pm

Is there one available for the TAZ? I got four hours into a twelve hour print and the extruder jammed. :(

tnx.

g.

arez9438
Posts: 1
Joined: Mon Feb 03, 2014 12:40 am

Re: Budaschnozzle fan duct...

Post by arez9438 » Mon Feb 03, 2014 12:43 am

I see the Lulzbot is designed for the Budaschnozzle, but I want to use my J-head MK-vb hotend from Hotends.com -

jebba
Site Admin
Posts: 689
Joined: Mon Mar 25, 2013 4:11 pm

Re: Budaschnozzle fan duct...

Post by jebba » Mon Feb 03, 2014 3:02 pm

arez9438 wrote:I see the Lulzbot is designed for the Budaschnozzle, but I want to use my J-head MK-vb hotend from Hotends.com -
Weird post. Everything else arez9438 posts in other forms seems to be spam (or seeding for spam), but doing it automated from reifschneiderb (jhead guy) seems really unlikely. I'll leave it as a curiosity instead of deleting it as spam. ;)

-Jeff

Post Reply