I have an opportunity to get a great deal on a nearly new Taz 6 and then maybe sell my Taz 5 locally or on Ebay.
Is the Taz 6 print quality better than what the Taz 5 can do? Can it print at a higher resolution?
I already have a Taz 5 that has Tim Pierce’s Z-anti wobble installed (thanks TIM!), itworks3d E3D Titan Aero Toolhead (thanks Jamie!) installed and I updated Marlin 1.1.4 (Thanks Sebastian!) . It has been rock solid, but print quality is not as nice as my Cube 3 (70nm) in PLA. I also rarely have to level the bed, and tend to use Simplify3D more than Cura.
I planned on adding Tim’z X axis and possibly Y axis mods, as I do notice the Taz 5 print head mount wobbles slightly so hoping v-rails will remove the minor print noise and banding the X and Y tend to have.
I am on the fence, the Taz 6 is sexy. I assume the Taz 7 will be out soon too, so there is that too…
Cheers