Page 1 of 1

A101-1 cad files?

Posted: Sat May 24, 2014 6:13 am
by drmacro
Are the A101-1cad or stl files avaialble as a starting point for modifications?

Re: A101-1 cad files?

Posted: Sat May 24, 2014 10:06 pm
by piercet
Source and STL files are located here: http://download.lulzbot.com/AO-101/hard ... ts/source/
and here http://download.lulzbot.com/AO-101/hard ... parts/stl/

If you want the base files for any of the parts for my set of upgrades, they are either here in the forum somewhere, or if not, let me know which ones you are looking for and I can get you a copy.

For modifying your own, be aware that there is something weird with the lower X end clamp STL file for the stock AO-101. I had to redraw that one to make it usable for modification.

Gemini64 also has a complete frame mock up in CAD somewhere in the forums as well if I remember right.

Re: A101-1 cad files?

Posted: Tue May 27, 2014 12:22 pm
by Theycallmejohn
I have redrawn some of the parts in Solidworks as well. Let me know if you need anything.

Glad to see some people getting interested again in modifying and upgrading there AO-101.

Re: A101-1 cad files?

Posted: Tue Jul 22, 2014 10:47 pm
by Gemini64
Sorry for being late to the party! I haven't done much 3D printing in the past few months.
piercet wrote:Gemini64 also has a complete frame mock up in CAD somewhere in the forums as well if I remember right.
Don't remember if I posted it, but I can supply my file if needed. It's modeled in FreeCAD.

drmacro: I'm normandc on the FreeCAD forum.