3.2.23 not slicing

Look here for custom firmware, networked 3D printer hosts like OctoPrint, and more!
Post Reply
Posts: 2
Joined: Fri Apr 08, 2016 11:04 am

3.2.23 not slicing

Post by javadoody » Sat Sep 08, 2018 10:12 am

I've downloaded 3.2.23 three times now and it still won't slice the loaded stl. It also lists my printer twice, and every time I attempt to delete the second it crashes. Any ideas as to what I may be doing wrong? Thanks.

Posts: 26
Joined: Fri May 18, 2018 8:53 am

Re: 3.2.23 not slicing

Post by dysan » Thu Sep 13, 2018 11:02 am

I noticed the same thing as far as 2 printers showing and when I try to delete the second one the program closes.

Aleph Objects | LulzBot
Posts: 65
Joined: Mon Jul 31, 2017 9:20 am

Re: 3.2.23 not slicing

Post by zachah » Fri Sep 14, 2018 1:48 pm

Try clearing out your cache. Any time I've run into issues like this clearing out the cache does the trick. It will clear out all of the printers and start fresh.

Instructions for clearing out your cache can be found on the download page for your operating system.

Ubuntu: https://www.lulzbot.com/learn/tutorials ... ion-ubuntu

Debian: https://www.lulzbot.com/learn/tutorials ... ion-debian

macOS: https://www.lulzbot.com/learn/tutorials ... tion-macos

Windows: https://www.lulzbot.com/learn/tutorials ... on-windows

Post Reply