Cura-Lulzbot - 2.6.52 - missing materials for TAZ 5 single extruder

Look here for custom firmware, networked 3D printer hosts like OctoPrint, and more!
Post Reply
k7zpj
Posts: 14
Joined: Tue Nov 29, 2016 7:37 pm

Cura-Lulzbot - 2.6.52 - missing materials for TAZ 5 single extruder

Post by k7zpj » Fri Nov 24, 2017 5:50 pm

With Cura 2.6.52, a number of materials are missing out of the materials list for the TAZ 5 with single extrude.
I looked at one of the material files (polylite PLA) and found that the TAZ5 single extruder isn't listed.

The file is listed below and TAZ 5 is missing for the single extruder (lulzbot_taz5)

Is this by design or a bug?


<?xml version='1.0' encoding='UTF-8'?>
<fdmmaterial xmlns="http://www.ultimaker.com/material">
<metadata>
<name>
<brand>Generic</brand>
<material>PolyLite PLA (Polymaker)</material>
<color>Generic</color>
<category>Beginner</category>
</name>
<GUID>506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9</GUID>
<version>1</version>
<color_code>#8DB6CD</color_code>
<info_link>https://www.lulzbot.com/store/filament/ ... /info_link>
</metadata>
<properties>
<density>1.25</density>
<diameter>2.85</diameter>
</properties>
<settings>
<setting key="print temperature">200</setting>
<setting key="heated bed temperature">60</setting>
<setting key="standby temperature">175</setting>
<setting key="soften temperature">175</setting>
<setting key="probe temperature">140</setting>
<setting key="wipe temperature">140</setting>
<setting key="part removal temperature">45</setting>
<machine>
<machine_identifier product="lulzbot_taz6_dual_v3"/>
<metadata key="category">Supported</metadata>
</machine>
<machine>
<machine_identifier product="lulzbot_taz5_moarstruder"/>
</machine>
<machine>
<machine_identifier product="lulzbot_taz5_dual_v3"/>
<metadata key="category">Supported</metadata>
</machine>
<machine>
<machine_identifier product="lulzbot_taz6_moarstruder"/>
</machine>
<machine>
<machine_identifier product="lulzbot_taz6_aerostruder"/>
</machine>
<machine>
<machine_identifier product="lulzbot_taz6"/>
</machine>
<machine>
<machine_identifier product="lulzbot_mini_aerostruder"/>
</machine>
<machine>
<machine_identifier product="lulzbot_taz6_dual_v2"/>
</machine>
<machine>
<machine_identifier product="lulzbot_mini"/>
</machine>
</settings>
</fdmmaterial>

Brent.I
Aleph Objects | LulzBot
Posts: 502
Joined: Mon Jan 20, 2014 8:21 am

Re: Cura-Lulzbot - 2.6.52 - missing materials for TAZ 5 single extruder

Post by Brent.I » Mon Nov 27, 2017 9:31 am

Hello k7zpj,

Thank you for the report, this is not intentional and we have opened a bug ticket to look into it, and get it sorted for future releases: https://code.alephobjects.com/T1363

As for now, go ahead and use the Verbatim or Village Plastics PLA profiles. The Polylite PLA profile was based on these, and should be fairly close.

k7zpj
Posts: 14
Joined: Tue Nov 29, 2016 7:37 pm

Re: Cura-Lulzbot - 2.6.52 - missing materials for TAZ 5 single extruder

Post by k7zpj » Mon Nov 27, 2017 9:08 pm

Thank you.

Post Reply