Hi
I just got a V2 dual tool head and I am trying to integrate my offsets into the firmware as to not have to add them to the slicer/gcode because Simplify3D is not playing nicely. I downloaded the code from here: http://download.lulzbot.com/TAZ/5.0/software/2016Q2/Marlin/Marlin_TAZ5_1.0.0.1.tar.gz
Opened in Arduino IDE (after copying the AddOns). I modified Configuration.h to contain 2 extruders as well as the custom offset for T1.
// This defines the number of extruders
#define EXTRUDERS 2
// For the other hotends it is their distance from the extruder 0 hotend.
#define EXTRUDER_OFFSET_X {0.0, -0.68} // (in mm) for each extruder, offset of the hotend on the X axis
#define EXTRUDER_OFFSET_Y {0.0, -49.805} // (in mm) for each extruder, offset of the hotend on the Y axis
The problem is that after compiling and installing the firmware with Cura, I can’t get the front hotend to heat and the temperature reads 478* for it. Is there something else I need to change?
Thanks