Page 1 of 1

Custom Firmware for Taz 5 with 700mm zAxis and Aerostruder

Posted: Sun Sep 23, 2018 6:30 pm
by LifEnabled
Hello I have a Taz 5 with a 700mm zaxis. I had a toolhead fail and decided to try an aerostruder. I am having trouble compiling the firmware to flash the new settings. Can you help me out.

I need to change,

Zmax to 700mm
Zsteps to 400
And then have the code for the Aerostruder
F54C0C3F-7137-4406-9109-346BD790BBD4.jpeg