After 3.5 months of constant printing almost exclusively with ColorFabb nGen on a Taz6, I am beginning to have problems with parts of the base layer on edges detaching after removing the part from the plate.
I am currently printing at 230C nozzle temperature, 85C bed temperature in High Detail.
The major change I made was printing in high detail.
I have not tweaked anything in the profile.
I have cleaned the nozzle tip 5 times over that period.
Humidity has increased with the advent of springtime, but I have mostly kept all my filament in sealed bags with the exception of the current (and new) black filament that the separation is occuring with. Exposure has been around 26 hours since new to me.
What am I missing?