cpe print settings

Filament
1

Hi,
What are the correct settings for printing with CPE (ultimaker brand) on the TAZ 6.

Any help is much appreciated.

Cheers.

2

There’re some details on the Ultimaker site for the material: https://ultimaker.com/en/resources/22229-how-to-print-with-ultimaker-cpe

There’re also a profile in the Cura installation in the resources\materials\ultimaker folder-- ultimaker_cpe_black.xml.fdm_material, for example. That specifies a print temp of 240, bed temp of 70, and standby(?) of 175.

Hope this helps you get started!