Page 1 of 1


Posted: Wed Oct 31, 2018 4:19 pm
by mhristau
Anyone working with Matteforge?
I have several great prints working with their matte white. Just received grey and not getting usable prints. Any notes on settings much appreciated!

Re: Matteforge

Posted: Wed Oct 31, 2018 9:21 pm
by zachah
Their website lists the printing temperatures as "180 - 220C (ideal 195C)"

It's possible this is a temperature issue, first try printing with a temperature 5-10 degrees colder than what you are using now.

Then if that doesn't yield the results you are looking for try increasing the temperature by 5-10 degrees from what you were using.

Some pictures of your current prints would be helpful as well for seeing what may need to be changed.

Re: Matteforge

Posted: Sat Feb 09, 2019 2:40 am
by CoParaTech
I've noticed that there can be a difference in nozzle temp requirements with different colors of some brands of filaments. I'm currently testing MatteForge black and haven't hit the sweet spot yet but getting closer. I'm having a real problem getting objects to stay attached to the PEI bed past about 10mm high or so.