Filament suggestions

Help with printing with specific plastic filaments.
Post Reply
Posts: 1
Joined: Fri Nov 02, 2018 9:39 am

Filament suggestions

Post by pezmoses » Fri Nov 02, 2018 9:45 am


I have a Lulzbot Taz 6 and wanted to 3D print a part that is currently made from TPU (Thermoplastic PolyUrethane) with a shore hardness of 70A. I was looking to buy a filament for this and found NinjaFlex ( Is this the appropriate filament or is there something better out there? Can this be used with the Taz 6?


Aleph Objects | LulzBot
Posts: 65
Joined: Mon Jul 31, 2017 9:20 am

Re: Filament suggestions

Post by zachah » Tue Nov 20, 2018 4:36 pm

NinjaFlex is reported to have a shore hardness of 85 so depending on your needs that may still be a good fit.

In order to print flexible materials with your Taz 6 you will need either a Flexystuder or an Aerostruder to do so. ... ol-head-v2 ... -tool-head

Post Reply