Taz 6 StD head and Corkfill

Help with printing with specific plastic filaments.
Post Reply
Posts: 52
Joined: Fri Oct 12, 2018 11:55 am

Taz 6 StD head and Corkfill

Post by B-Hep-Spring » Fri Feb 01, 2019 12:13 pm

any advise on printing with cork fill Im using the modular bed Pei side I cannot get the print to stick when it does the nozzle drags anything it touches away from the print eventually causing a clog around the nozzle,, I 'm printing at 210 and trying to keep the nozzle clean but its trying my patience...

User avatar
Aleph Objects | LulzBot
Posts: 1482
Joined: Wed Mar 27, 2013 1:24 pm
Location: US

Re: Taz 6 StD head and Corkfill

Post by Orias » Thu Feb 14, 2019 2:39 pm

What slicing profile are you using? Give the woodFill profiles in Cura LulzBot Edition a go. Reach out to the support team with a picture of your first layer and they'll be able to help make tuning recommendations.

Post Reply