Trying to get a NinjaFlex profile

Help with printing with specific plastic filaments.
Post Reply
westicles
Posts: 3
Joined: Mon Feb 18, 2019 12:22 pm

Trying to get a NinjaFlex profile

Post by westicles » Mon Feb 18, 2019 12:41 pm

I'm trying to get my TAZ6 setup for printing with NinjaFlex. I'm having a few problems. I'm seeing that there should be a NinjaFlex material profile, but there isn't.

Also, when trying to import the NinjaFlex profile, I get the following error. This profile is straight from the lulzbot.com page.
Capture.PNG
Capture.PNG (11.26 KiB) Viewed 410 times
i'm not sure what i'm doing wrong. Any help is greatly appreciated.

Thanks!

User avatar
Orias
Aleph Objects | LulzBot
Posts: 1509
Joined: Wed Mar 27, 2013 1:24 pm
Location: US

Re: Trying to get a NinjaFlex profile

Post by Orias » Mon Feb 18, 2019 3:35 pm

Grab the latest version of Cura LulzBot Edition from LulzBot.com/Cura. Under Settings, select Printer, and Add Printer. Choose the TAZ 6 and select the Flexystruder v2 Tool Head:
add-new-printer.png
Reach out to the support team if you'd like detailed help: LulzBot.com/Support.

westicles
Posts: 3
Joined: Mon Feb 18, 2019 12:22 pm

Re: Trying to get a NinjaFlex profile

Post by westicles » Tue Feb 19, 2019 7:38 am

that did it!! Thank you so very much!

Post Reply