Mini Marvin

Show off your stuff!
Post Reply
AndrewMini
Posts: 20
Joined: Tue May 31, 2016 10:16 am

Mini Marvin

Post by AndrewMini » Fri Jun 24, 2016 9:01 am

Been trying to print a 10mm high Marvin on the Mini in PLA.
Mini Marvin.jpg
Not perfect, but improving. Any helpful comments for getting it better please fire away.
Polymax PLA 190C, single print as is, 0.1mm layer, 2 shells, 4 top, 4 bottom, with custom fan shroud and 10s min layer.
Last edited by AndrewMini on Fri Jun 24, 2016 10:01 am, edited 3 times in total.

Sebastian
Posts: 514
Joined: Sun Sep 13, 2015 5:54 am

Re: Mini Marvin

Post by Sebastian » Fri Jun 24, 2016 9:09 am

A working image would be a good start point for comments :)

AndrewMini
Posts: 20
Joined: Tue May 31, 2016 10:16 am

Re: Mini Marvin

Post by AndrewMini » Fri Jun 24, 2016 9:24 am


AndrewMini
Posts: 20
Joined: Tue May 31, 2016 10:16 am

Re: Mini Marvin

Post by AndrewMini » Fri Jun 24, 2016 9:41 am

Sebastian wrote:A working image would be a good start point for comments :)
Can you see it now? I can only see it when I'm logged in...

Sebastian
Posts: 514
Joined: Sun Sep 13, 2015 5:54 am

Re: Mini Marvin

Post by Sebastian » Fri Jun 24, 2016 9:44 am

No image, download not working.

AndrewMini
Posts: 20
Joined: Tue May 31, 2016 10:16 am

Re: Mini Marvin

Post by AndrewMini » Fri Jun 24, 2016 9:49 am

:( ok, thanks, need to find another way to post the image. :?:

AndrewMini
Posts: 20
Joined: Tue May 31, 2016 10:16 am

Re: Mini Marvin

Post by AndrewMini » Fri Jun 24, 2016 11:09 am

Mini Marvin 2.jpg
His little brother was not quite so good. :lol:

AndrewMini
Posts: 20
Joined: Tue May 31, 2016 10:16 am

Re: Mini Marvin

Post by AndrewMini » Wed Jul 13, 2016 7:54 am

Thanks! 8-)

aurie
Posts: 1
Joined: Wed Apr 17, 2019 12:54 pm

Re: Mini Marvin

Post by aurie » Wed Apr 17, 2019 12:55 pm

Looks cool!

Danny74
Posts: 2
Joined: Thu May 02, 2019 12:01 am

Re: Mini Marvin

Post by Danny74 » Thu May 02, 2019 1:48 am

This post is good and informative for me.

Post Reply