TAZ 6 Enclosure

Here is my Custom built TAZ 6 Enclosure, here are the details:

Wood 2 part frame
insulation: bubble wrap
frame covered in TAPIX brand construction warning tape. https://www.amazon.com/gp/product/B01GIRC54M/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

dual 3D printed spool holders https://www.thingiverse.com/thing:1608830
3D printed brackets to hold the front frame on. (designed in fusion 360 and printed in ABS)
LED lighting strips. https://www.amazon.com/gp/product/B00HSF65MC/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1


o/7
20170531_015130.jpg
20170531_015207.jpg
20170531_015200.jpg
20170531_015124.jpg

That looks awesome. Great job

Thanks for sharing. It’s a pretty nice enclosure! Have you measured the internal temp to see how hot it gets? Is there any improvement to abs warping?

My internal temps are 40 to 45C, I have never tried to print ABS without it but I have not had any ABS warping issues with the enclosure . I tend to preheat the enclosure with the heat-bed prior to printing to make sure the air temp is the same from start to finish.

Thanks!