Hello Everyone,
I have been using Lulzbot printers for a while now, and mostly could figure out issues on my own, but this time i’m stuck.
I was using my Lulzbot printer with a Aerostruder no problem, until the day that i had a catastrophic failure and had to switch to a Flexydually as a backup extruder until i got parts to fix my Aerostruder.
Fixed the Aerostruder but now my printer refuses proper home, we all know that lulzbot taz 6 should home x and y and them home a little bit to home z using the z-button, right, mine is not doing that… I have quadruple checked firmwares, tried all different versions of marlin that i could get my hands on aka: http://download.lulzbot.com/Software/Marlin/
If I return the firmware and the Flexydually everything works
Video of the weird homing: https://www.youtube.com/watch?v=jywW3__x0fo&feature=youtu.be
Video of if properly homing after flashing flexidually: https://www.youtube.com/watch?v=KQR37TVnx_U&feature=youtu.be
I’m truly lost, if someone has any idea let me know!
Just one FYI: I’m a software developer, even compiled my own versions of marlin back on the day of getting taz 5 and capacitive sensors to level the printer bed.