What slic3r profile?

With all the different profiles, what is the most common one to use for the bulk of oh say… printed parts that you might use to upgrade or repair your TAZ? We’ll start there… the support checkboxes I understand when to use and not, but do you use high quality, draft, only the ones with 35 in their name, etc?

Alan

I think you can grab the gcode that lulzbot uses / used to print the ao-100 and taz from here:

http://devel.lulzbot.com/

and probably use that as a guide.

For TAZ batch one, the files are here:

http://download.lulzbot.com/TAZ/hardware/printed_parts/

For the next batch (printing in progress), the files are here in printed_parts and test_parts:

http://devel.lulzbot.com/TAZ/