Hundreds of Print Profiles on TAZ 6?

How is this possible? Is this in Cura or Marlin? Can you put this on a TAZ 5?

Where do I get this upgrade does anyone know :slight_smile:

Thanks,
Chris

The print profiles are built into Cura LulzBot Edition. That version of Cura supports three different LulzBot 3D printers, with potentially 14 different printer:tool head permutations, with 30 different filaments, each of which has at least one different Quickprint profile.

To get the latest tested Quickprint profiles update Cura by checking LulzBot.com/Cura.

If you’d like to see what goes into our profiles, they can be found here: https://code.alephobjects.com/diffusion/P/browse/master/ and https://code.alephobjects.com/diffusion/P/browse/experimental/

These are all the profiles for all LulzBot printers in Cura. So it includes older machines and multiple profiles for various materials (e.g. ABS has three profiles). In sum:

/usr/share/cura/resources/quickprint/lulzbot_profiles$ find . -type f | wc -l
297

Is Cura v19 just for the new TAZ 6? or can I install it to use with my Taz 5?

Thanks,
Chris

It’s for all models, and non-lulzbot printers too… https://www.lulzbot.com/cura