Replacement Electronics Switch

My bed stopped heating recently. The bed heat fuse was fine, but I traced the problem back to the switch. One of the wires looked burned badly (see attached). I need to replace the switch, does anyone have a part number? I looked on the BOM and it just says Digikey 1473 which doesn’t narrow it down for me… Thanks!

I was able to get it back working by bypassing the switch temporarily.

photo.JPG480×640 83.3 KB

Hey there, if you’re printer is under warranty, the part should be able to be replaced. Otherwise the part numbers are: for the switch 1091-1017-ND and for the quick connects A27824-ND.

Thanks! They’re pretty cheap and I need to place a digikey order anyway so I’m just going to throw them on that order.