tmoore
February 8, 2014, 3:33am
1
Could someone point me to the STL file of the current large gear for the subject printer? The gears from the Download section are .020" thinner than the stock gear that comes with the printer. The large gear is .437 thick while the models from the download section is measuring .417".
Thanks,
TM
Orias
February 10, 2014, 2:32pm
2
The models we are using can be found here: http://download.lulzbot.com/TAZ/3.0/production_parts/printed_parts/stl/herringbone_large_gear-1.1.c.stl
We have presliced gcode files availble for use if you are using an AO-series 3D printer with 0.5mm nozzle here: http://download.lulzbot.com/TAZ/3.0/production_parts/printed_parts/gcode/AO_printers/herringbone_large_gear/
That folder also contains the Slic3r configuration used to slice them, so if you’d like to print them on your TAZ you’ll need to load the Slic3r configuration and cut the stl from above.
tmoore
February 10, 2014, 6:25pm
3
I used that model and the part comes out .5mm thinner than the gear on my TAZ.
Orias
February 10, 2014, 7:19pm
4
tmoore
February 10, 2014, 7:28pm
5
That would be the one. Excellent. Thank you.