Taz 6 rambo 1.3 for board replacement.

A forum dedicated to the stock LulzBot TAZ 3D Printer
Galadriel
Aleph Objects | LulzBot
Posts: 271
Joined: Mon Sep 25, 2017 10:23 am

Re: Taz 6 rambo 1.3 for board replacement.

Post by Galadriel » Wed Sep 26, 2018 9:08 am

nopick wrote:
Wed Sep 26, 2018 7:02 am
That is correct. UM does not install the pins for the 5V Aux out or the X30 pins in the opposite corner of the board by default. They will send you the Lulzbot version of the board if you let them know that is what you need.

Lulzbot, you should sell the bare Lulzbot config board on your site rather than only selling the kits. The kits cost too much. We don't need wires and switches. That drives your customers to purchase the board from UM which causes issues for them due to the missing pins.
It looks like it is out of stock currently unfortunately (at least in the USA) but we do sell the RAMBo board without the wiring harnesses and connectors, just as a heads up :) Here is a link to it: https://www.lulzbot.com/store/parts/ass ... connectors

nopick
Posts: 949
Joined: Mon Sep 09, 2013 11:14 am

Re: Taz 6 rambo 1.3 for board replacement.

Post by nopick » Wed Sep 26, 2018 9:15 am

Galadriel wrote:
Wed Sep 26, 2018 9:08 am
nopick wrote:
Wed Sep 26, 2018 7:02 am
That is correct. UM does not install the pins for the 5V Aux out or the X30 pins in the opposite corner of the board by default. They will send you the Lulzbot version of the board if you let them know that is what you need.

Lulzbot, you should sell the bare Lulzbot config board on your site rather than only selling the kits. The kits cost too much. We don't need wires and switches. That drives your customers to purchase the board from UM which causes issues for them due to the missing pins.
It looks like it is out of stock currently unfortunately (at least in the USA) but we do sell the RAMBo board without the wiring harnesses and connectors, just as a heads up :) Here is a link to it: https://www.lulzbot.com/store/parts/ass ... connectors
Thanks. I didn't find it in the store previously but, it has been a few months since I looked for it.

Post Reply