Hi all.
Really hope someone can help me here.
I would like to print the infill with extruder 1 and the shell with extruder 2.
Is that possible and how?
Thanks.
Hi all.
Really hope someone can help me here.
I would like to print the infill with extruder 1 and the shell with extruder 2.
Is that possible and how?
Thanks.
Yes, it should be possible. This would be accomplished by settings in your slicer but you didn’t mention what slicer you are using.
I’ll assume that you are using the latest version of CuraLE (3.2.27):
Note: I have not printed anything using these settings. I just verified that the layer view looks correct. Let us know if you are successful using these settings.