Taz 6 Aerostruder Blobs

A forum dedicated to the stock LulzBot TAZ 3D Printer
Post Reply
mjp9af
Posts: 1
Joined: Wed Dec 05, 2018 9:16 pm

Taz 6 Aerostruder Blobs

Post by mjp9af » Wed Dec 05, 2018 9:21 pm

Greetings All,

Having issues with 2 Taz6 printers, both with Aerostruders.

Printed the standard calibration cube, and this came out.

Blobs and poor performance galore.

I'm looking online and seeing common causes ranging from temperature issues to underextrustion. Any observations or suggestions on what could be going on and what actions can be done?

Thanks!
Attachments
unnamed2.jpg
Calibration Cube
unnamed1.jpg
Calibration Cube

nopick
Posts: 945
Joined: Mon Sep 09, 2013 11:14 am

Re: Taz 6 Aerostruder Blobs

Post by nopick » Thu Dec 06, 2018 7:43 am

This looks like massive over extrusion. Did you change the e-steps to match what the aerostruder needs?

Post Reply