I recently installed a SL tool head on my Mini 1, leaving me with an extra Mini head. I’m wondering if that head can be adapted for use on a TAZ 5 to incorporate the auto leveling that the Mini has. Obviously I would need to print out new corners in TPU and acquire the washers, but what I don’t know is what changes would need to be made to the wiring or if the TAZ board can even accommodate this. If this has been discussed before, I’d appreciate a point in that direction.
Here’s a bit of info on what’s involved at upgrading a TAZ 5 to a TAZ 6: https://forum.lulzbot.com/t/upgrading-a-lulzbot-taz-5-to-taz-6/3456/1