Taz 4 Extruder Fan

A forum dedicated to the stock LulzBot TAZ 3D Printer
Post Reply
underdog1924
Posts: 26
Joined: Wed Dec 17, 2014 7:15 am

Taz 4 Extruder Fan

Post by underdog1924 » Wed Feb 13, 2019 7:13 am

I have a new fan to put on the extruder of my Taz 4 but I don't know what size pins are needed to crimp onto the wires so they fit in the Molex connector housing. Does anyone know?

User avatar
Orias
Aleph Objects | LulzBot
Posts: 1472
Joined: Wed Mar 27, 2013 1:24 pm
Location: US

Re: Taz 4 Extruder Fan

Post by Orias » Wed Feb 13, 2019 1:07 pm

Here's the drawing for the TAZ 4 Extruder harness, from the connectors to the large circular connector:
http://download.lulzbot.com/TAZ/4.0/pro ... %201.0.pdf

This drawing has more details on the tool head side (Libre Office Draw): http://devel.lulzbot.com/TAZ/accessorie ... t_v1.0.odg
This should work: Molex-CONN TERM MALE 22-24AWG TIN
https://www.molex.com/molex/products/da ... MINALS.xml
Available here: https://www.lulzbot.com/store/parts/mol ... al-pin-x30

Post Reply