Taz 4 Extruder Fan

I have a new fan to put on the extruder of my Taz 4 but I don’t know what size pins are needed to crimp onto the wires so they fit in the Molex connector housing. Does anyone know?

Here’s the drawing for the TAZ 4 Extruder harness, from the connectors to the large circular connector:
http://download.lulzbot.com/TAZ/4.0/production_parts/Electronics/External_Harnesses/Extruder%20Extension%201.0.pdf

This drawing has more details on the tool head side (Libre Office Draw): http://devel.lulzbot.com/TAZ/accessories/extrusion_fan/Production_Docs/24v_fan_add-on_kit_v1.0.odg
This should work: Molex-CONN TERM MALE 22-24AWG TIN
https://www.molex.com/molex/products/datasheet.jsp?part=active/0016020107_CRIMP_TERMINALS.xml
Available here: https://www.lulzbot.com/store/parts/molex-sl-22-24-awg-crimp-terminal-pin-x30