Taz Pro Build Log

A forum dedicated to the stock LulzBot TAZ 3D Printer
Post Reply
Techsavvy34
Posts: 84
Joined: Sat Mar 01, 2014 3:23 am
Contact:

Taz Pro Build Log

Post by Techsavvy34 » Sun May 05, 2019 6:54 pm

I'm currently in the process of building a Taz Pro and thought I'd share some pics. I have all the parts needed to build one except I still need to print the printed parts. The Z axis motors and shafts will be arriving this week. I machined all the metal parts now I need to powder coat the ones that are. My friend is laser cutting the electronics enclosure for me and I will bend it. I received the filament sensor, dual extruder, USB and CLCD pcb boards from OSHpark. I'm gonna solder them with my reflow oven.
Attachments
20190416_200406.jpg
20190416_144230.jpg
20190419_194414.jpg

User avatar
piercet
Posts: 4021
Joined: Sun Aug 25, 2013 1:37 am
Location: Battleground, WA
Contact:

Re: Taz Pro Build Log

Post by piercet » Sun May 05, 2019 10:11 pm

Neat!!!

Let me know if you have any interest in selling a set of the y and top frame plates, possibly 3 of the frame corners if you are cutting them? I'm going a different route on the motion bits and the extruder setup. I will be adding the filliment sensors for sure though.

Techsavvy34
Posts: 84
Joined: Sat Mar 01, 2014 3:23 am
Contact:

Re: Taz Pro Build Log

Post by Techsavvy34 » Fri May 10, 2019 3:18 pm

Finished building the filament sensor assembly. Received the electronics enclosure today just have to add the pem nuts and bend it. Slowly working on building the tool head. Everything is coming together nicely.
Attachments
20190510_160234.jpg
20190510_160318.jpg
20190510_155909.jpg

Post Reply