Taz 5 with SL 0.25mm tool head

A forum dedicated to the stock LulzBot TAZ 3D Printer
Post Reply
Posts: 1
Joined: Thu Jun 06, 2019 4:56 pm

Taz 5 with SL 0.25mm tool head

Post by MIA » Thu Jun 06, 2019 5:03 pm

Hi all, I just had to replace a lot of parts on a Taz 5 machine and decided to give the SL tool head a shot. I printed and moved the heatsets over to the new corners, but am running into what seems like a very large issue. I can't home my machine! The extruder strikes the bed corner before being at the proper height for Z-stop.

Are there other bed retainers with a countersunk screw head? Speaking to Lulzbot tech support I was assured this would work with my Taz 5 with the parts I ordered with it (and the 4 corners I had to print)

User avatar
Aleph Objects | LulzBot
Posts: 1509
Joined: Wed Mar 27, 2013 1:24 pm
Location: US

Re: Taz 5 with SL 0.25mm tool head

Post by Orias » Mon Jun 10, 2019 10:00 am

Reach out to the support team for help, include pictures of your Z-axis homing endstop, and pictures of what you've replaced: https://LulzBot.com/Support.

Post Reply