Kittaz build on pause.

A forum dedicated to those intrepid few, that have built their own TAZ 3D printers using our KITTAZ.
jebba
Site Admin
Posts: 689
Joined: Mon Mar 25, 2013 4:11 pm

Re: Kittaz build on pause.

Post by jebba » Mon Mar 16, 2015 8:47 pm

saramos wrote:Failing that, I planned to then try and heat the insert with a soldering iron and lever it up a touch.
If I followed your issue correctly, this is probably the best fix. If your heat insert is in the wrong spot, heat it up a bit and you can move it further in.

saramos
Posts: 195
Joined: Fri Sep 19, 2014 1:05 am

Re: Kittaz build on pause.

Post by saramos » Mon Mar 16, 2015 10:20 pm

Thanks jebba!

saramos
Posts: 195
Joined: Fri Sep 19, 2014 1:05 am

Re: Kittaz build on pause.

Post by saramos » Tue Mar 17, 2015 3:11 am

The soldering iron worked like a charm.

Cheers,
Scott

saramos
Posts: 195
Joined: Fri Sep 19, 2014 1:05 am

Problem with graphic display.

Post by saramos » Mon Mar 23, 2015 1:28 pm

Moved post to new topic.

Scott

Post Reply