Another newbie question…
When I received my refurbished lulzbot mini there were a couple of scratches on the pei bed. It looks like someone got too aggressive removing a well adhered part with the spudger. These scratches leave noticeable marks in parts.
After reviewing the various forums and maintenance guides it appears that my best shot at repairing the bed would be to wet sand the bed with 1000-4000 grit sandpaper using 1 part acetone diluted with 9 parts water as the lubricant. If that doesn’t work I’ll order a new pei print surface.
Does anyone have a better approach to buffing out the scratches?
David