Lulzbot

A forum dedicated to the stock LulzBot Mini 3D Printer
Post Reply
john5634
Posts: 1
Joined: Wed May 30, 2018 10:17 pm

Lulzbot

Post by john5634 » Wed May 30, 2018 10:24 pm

I had a lulzbot first generation (with the smaller cables trays) And now I have a brand new lulzbot mini.

My new lulzbot mini, with the same firmware and same Gcode is having a lot of ringing/Ghosting in the prints.

Attached is my cura project file and two pictures of the issue. One picture has the wavyness and the other does not. The OLD printer does not have the wavyness, and the new printer does!

I also attached the STL (need 7 of them in one print) and GCODE I am using.​

All files are in this google drive folder: https://drive.google.com/drive/folders/ ... sp=sharing

Please help!!! Much apprecaited!

John

Post Reply