Bridiging problems

A forum dedicated to the stock LulzBot Mini 3D Printer
Post Reply
Stuntz2ya
Posts: 9
Joined: Sun Apr 23, 2017 7:26 pm

Bridiging problems

Post by Stuntz2ya » Thu Jul 19, 2018 3:38 pm

Any suggestions on how to fix basic bridging problems with my prints?

kcchen_00
Posts: 1688
Joined: Thu Feb 19, 2015 12:42 am

Re: Bridiging problems

Post by kcchen_00 » Thu Jul 19, 2018 7:47 pm

What problems are you having? We don't have ESP... :-) Pictures, sample STL, and filament type would help.

They key is to help the filament cool and solidify as soon as possible. Here are some generic suggestions:
- Increase extrusion cooling usually helps
- Extrusion temp as low as possible
Keep in mind each of these may affect the print in different ways.

Spanning 5-8mm should be pretty easy... if the span is larger, then you'll really have to tweak your settings.

Post Reply