.25mm nozzle PLA profile?

A forum dedicated to the stock LulzBot Mini 3D Printer
mhristau
Posts: 49
Joined: Sun Jun 24, 2018 3:18 pm
Contact:

Re: .25mm nozzle PLA profile?

Post by mhristau » Fri Aug 24, 2018 4:56 pm

FWIW - A print using the Mini 2 Micro Standard profile (top) and a print using the Mini 2 High Detail profile modified for a .25 nozzle (bottom)
modification notes:
https://www.dropbox.com/s/n44n9wx7ymok7 ... e.pdf?dl=0
Attachments
point25nozzlePrints.jpg
bottom seems to have tighter corners

mhr_lulzbot
Posts: 26
Joined: Thu Jul 05, 2018 3:47 pm
Location: Fort Collins, CO
Contact:

Re: .25mm nozzle PLA profile?

Post by mhr_lulzbot » Thu Aug 30, 2018 4:13 pm

regarding the link to new Micro profiles,
Do I install the firmware for the Micro on my Mini 2
or
study the profile params and create same with Mini 2 printer active?

Is the Micro a Mini 2 with a .25mm nozzle?
Lulzbot Mini 2, Windows 10, RasPi 3+ w/ Camera v2, Epilog laser, CNC, Instagram: melristau, "Here's your beautiful brain. Here's your brain on Age."

Post Reply