OpenBCI EEG headset

Wondering if anyone has tried printing the OpenBCI Ultracortex Mark IV EEG headset with a LulzBot?

STL Files:
https://github.com/OpenBCI/Ultracortex/tree/master/Mark_IV/MarkIV-FINAL/STL_Directory

Product:
https://shop.openbci.com/products/ultracortex-mark-iv

I printed the helmet as one piece on a Taz 5 with the aerostruder for a customer. Came out quite well. I flipped it so the outside had the overhang and slight jaggy edges so when worn it wouldn’t catch on anything since the inside was smoother.

Cool. I look forward to trying this on my Mini. Unfortunately, I’ll have to do this in more than two parts as the print bed is small.