3d model of Mini2 Heatbed support plate

A forum dedicated to the stock LulzBot Mini 3D Printer
Post Reply
monsteroyd
Posts: 31
Joined: Fri Jul 06, 2018 3:30 pm

3d model of Mini2 Heatbed support plate

Post by monsteroyd » Fri Dec 14, 2018 1:45 pm

I'm not sure of the actual name, but I am looking for something that describes the heat bed plate, the metal part under the glass heat bed that the leveling washers screw into.

I want to print a camera mount for my Mini2 for Octoprint time elapses, and I want to mount mine up front on the Y axis bed.

I guess I could take a picture and use that in Fusion 360, but I was hoping, since this is an open source printer, that there was a Fusion 360 importable model (igs, stp, etc) of the heat bed metal plate and all somewhere that I could use.

Thanks
Monty
Lulzbot Mini 2

zachah
Aleph Objects | LulzBot
Posts: 65
Joined: Mon Jul 31, 2017 9:20 am

Re: 3d model of Mini2 Heatbed support plate

Post by zachah » Fri Dec 14, 2018 2:39 pm

You can find all of those goodies in our download.lulzbot.com section of the site.

I've linked below to the pdf step and fcstd for the bed mount plate for you:
http://download.lulzbot.com/Mini/2.0.4/ ... unt_plate/

monsteroyd
Posts: 31
Joined: Fri Jul 06, 2018 3:30 pm

Re: 3d model of Mini2 Heatbed support plate

Post by monsteroyd » Fri Dec 14, 2018 3:15 pm

Perfect! I was looking there, but did not know how it was named.

Thanks
Monty
Lulzbot Mini 2

Post Reply