BQ Ciclop 3D Scanner build thread

A forum dedicated to the development of Free Software, Libre Innovation, and Open Source Hardware (FLO) 3D Scanners
jebba
Site Admin
Posts: 689
Joined: Mon Mar 25, 2013 4:11 pm

Re: BQ Ciclop 3D Scanner build thread

Post by jebba » Thu Jun 11, 2015 12:27 pm

Also, check out this thread for info on the software:

viewtopic.php?f=8&t=2270&p=13330#p13330

jebba
Site Admin
Posts: 689
Joined: Mon Mar 25, 2013 4:11 pm

Re: BQ Ciclop 3D Scanner build thread

Post by jebba » Thu Jun 11, 2015 2:03 pm


neotekcc
Posts: 5
Joined: Mon Jun 01, 2015 12:08 pm

Re: BQ Ciclop 3D Scanner build thread

Post by neotekcc » Thu Jun 18, 2015 7:40 am

There is a Piclop (Ciclop using a Raspberry Pi (or v2)). Modified parts are on Thingiverse. They are also using the FreeLSS for the software. This is a mashup of the Atlas and the Ciclop. I would post links but do not have full access to everything from work, and I didn't check licenses to make sure they are GPLv3 or similar.

Anonymouse
Posts: 56
Joined: Mon May 19, 2014 2:07 pm

Re: BQ Ciclop 3D Scanner build thread

Post by Anonymouse » Fri Jun 19, 2015 10:59 am

Everybody in this thread:
Attachments
surdways.jpg
surdways.jpg (26.69 KiB) Viewed 3330 times

User avatar
Orias
Aleph Objects | LulzBot
Posts: 1420
Joined: Wed Mar 27, 2013 1:24 pm
Location: US

Re: BQ Ciclop 3D Scanner build thread

Post by Orias » Fri Jun 19, 2015 11:20 am

Image

Seriously though, this is a sweet project! I'm mulling over the Pi based option.

neotekcc
Posts: 5
Joined: Mon Jun 01, 2015 12:08 pm

Re: BQ Ciclop 3D Scanner build thread

Post by neotekcc » Tue Jun 23, 2015 6:35 pm

Not to hijack the Ciclop thread, but here is my Piclop build in progress:
(The images are large so I used links instead)

http://www.haveno.info/IMG_20150623_201210.jpg
http://www.haveno.info/IMG_20150623_201222.jpg
http://www.haveno.info/IMG_20150623_201239.jpg

User avatar
Orias
Aleph Objects | LulzBot
Posts: 1420
Joined: Wed Mar 27, 2013 1:24 pm
Location: US

Re: BQ Ciclop 3D Scanner build thread

Post by Orias » Wed Jun 24, 2015 8:16 am

Not to hijack your Piclop build post:
That's an awesome power supply/control box for your TAZ!

neotekcc
Posts: 5
Joined: Mon Jun 01, 2015 12:08 pm

Re: BQ Ciclop 3D Scanner build thread

Post by neotekcc » Mon Jul 06, 2015 9:37 pm

IMG_20150706_233353.jpg
Piclop photo
Piclop on an Adafruit perma proto hat. (Using only 1 12V source to power it all.)

Post Reply