General Design Procedure for Free and Open-Source Hardware for Scientific Equipment

Open Access 3D Printing Research and Studies
Post Reply
User avatar
Orias
Aleph Objects | LulzBot
Posts: 1340
Joined: Wed Mar 27, 2013 1:24 pm
Location: US

General Design Procedure for Free and Open-Source Hardware for Scientific Equipment

Post by Orias » Mon Feb 26, 2018 2:17 pm

General Design Procedure for Free and Open-Source Hardware for Scientific Equipment
Journal: MDPI technologies
License: CC-BY
Full text (PDF): http://www.mdpi.com/2411-9660/2/1/2/pdf
Abstract: http://www.mdpi.com/2411-9660/2/1/2
Distributed digital manufacturing of free and open-source scientific hardware (FOSH) used for scientific experiments has been shown to in general reduce the costs of scientific hardware by 90–99%. In part due to these cost savings, the manufacturing of scientific equipment is beginning to move away from a central paradigm of purchasing proprietary equipment to one in which scientists themselves download open-source designs, fabricate components with digital manufacturing technology, and then assemble the equipment themselves. This trend introduces a need for new formal design procedures that designers can follow when targeting this scientific audience. This study provides five steps in the procedure, encompassing six design principles for the development of free and open-source hardware for scientific applications. A case study is provided for an open-source slide dryer that can be easily fabricated for under $20, which is more than 300 times less than some commercial alternatives. The bespoke design is parametric and easily adjusted for many applications. By designing using open-source principles and the proposed procedures, the outcome will be customizable, under control of the researcher, less expensive than commercial options, more maintainable, and will have many applications that benefit the user since the design documentation is open and freely accessible.

User avatar
piercet
Posts: 3966
Joined: Sun Aug 25, 2013 1:37 am
Location: Battleground, WA
Contact:

Re: General Design Procedure for Free and Open-Source Hardware for Scientific Equipment

Post by piercet » Thu Mar 01, 2018 4:06 pm

I've designed more than a few custom ROV thruster guards and mounting brackets for underwater researchers, it's great to be able to make something that may only take me a few minutes effort, but may make a realistic positive impact in the workflow of research that can help truly advance society. I may not be able to be out doing that research, but I can certainly contribute towards it!

Post Reply