Infill Percentage Table

Learn By Doing With These 3D Models
Post Reply
gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Infill Percentage Table

Post by gyukish » Thu Jul 20, 2017 9:24 am

Link: https://www.thingiverse.com/thing:927750/#files
License: CC BY-SA 3.0
Grade Level: All Levels
Courses: 3D Printing / Additive Design

This is an excellent model to demonstrate how infill percentages will affect a model.
Infill_Percentage.jpeg

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Infill Display

Post by gyukish » Thu Jul 20, 2017 9:26 am

Link: https://www.thingiverse.com/thing:927750/#files
License: CC BY-SA 3.0
Grade Level: All Levels
Courses: 3D Printing / Additive Design

This is the display for the different infill percentage models. This will take about nine hours to complete on high speed.
Infill_Display.png

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

0-20 Infill Percentage

Post by gyukish » Thu Jul 20, 2017 9:28 am

Link: https://www.thingiverse.com/thing:927750/#files
License: CC BY-SA 3.0
Grade Level: All Levels
Courses: 3D Printing / Additive Design

This is a label for infill percentages 0-20. This model will take about thirty minutes to complete on high speed.
0-20_Infill.png

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

25-50 Infill Percentage

Post by gyukish » Thu Jul 20, 2017 9:29 am

Link: https://www.thingiverse.com/thing:927750/#files
License: CC BY-SA 3.0
Grade Level: All Levels
Courses: 3D Printing / Additive Design

This is a label for infill percentages 25-50. This model will take about thirty minutes to complete on high speed.
25-50_Infill.png

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

60-100 Infill Percentage

Post by gyukish » Thu Jul 20, 2017 9:32 am

Link: https://www.thingiverse.com/thing:927750/#files
License: CC BY-SA 3.0
Grade Level: All Levels
Courses: 3D Printing / Additive Design'

This is a label for infill percentages 60-100. This model will take about thirty minutes to complete on high speed.
60-100_Infill.png

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

25mm Block

Post by gyukish » Thu Jul 20, 2017 9:35 am

Link: https://www.thingiverse.com/thing:927750/#files
License: CC BY-SA 3.0
Grade Level: All Levels
Courses: 3D Printing / Additive Design

This is the model used to print out different infill percentages. This model will take somewhere between thirty minute to one hour to complete on high speed depending on infill percentage. To see the interior infill percentage you may remove the top of the block manually, in a CAD software such as Blender. Alternatively you may tell the printer to stop at a specific layer height before completing the print.

25mm_Block.png
25mm_Block.png (10.36 KiB) Viewed 1669 times

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Infill Percentage Label

Post by gyukish » Thu Jul 20, 2017 9:37 am

Link: https://www.thingiverse.com/thing:927750/#files
License: CC BY-SA 3.0
Grade Level: All Levels
Courses: 3D Printing / Additive Design

This is a label to attach to the front of the display stand for aesthetic purposes. This model will take about thirty minutes to complete on high speed.
Infill_Label.png

Post Reply