Pulley System

Learn By Doing With These 3D Models
Post Reply
gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Pulley System

Post by gyukish » Thu Jul 20, 2017 1:46 pm

Link: https://www.thingiverse.com/thing:1713315
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is a model for a simple pulley system broken down into multiple components. Please note that the four case pulley system model will not fit on a TAZ 6 or LulzBot Mini 3D printer.
Pulley.jpg
Last edited by gyukish on Thu Jul 20, 2017 2:29 pm, edited 1 time in total.

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Wheel

Post by gyukish » Thu Jul 20, 2017 1:49 pm

Link: https://www.thingiverse.com/thing:1713315/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is the model for the wheel to be used in the pulley system. This model will take about one hour and thirty minutes to complete on high speed.
Wheel.png

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Single Case Pulley

Post by gyukish » Thu Jul 20, 2017 1:54 pm

Link: https://www.thingiverse.com/thing:1713315/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is a model for a single case pulley system. This model will take about two hours and forty minutes to complete on high speed.
Pulley_Case_1.png
Last edited by gyukish on Thu Jul 20, 2017 2:28 pm, edited 1 time in total.

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Two Case Pulley

Post by gyukish » Thu Jul 20, 2017 2:25 pm

Link: https://www.thingiverse.com/thing:1713315/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is a model for a double case pulley. This model will take about four hours to complete on high speed.
Pulley_Case_2.png
Last edited by gyukish on Thu Jul 20, 2017 2:28 pm, edited 1 time in total.

gyukish
Posts: 63
Joined: Tue Jul 18, 2017 1:50 pm

Three Case Pulley

Post by gyukish » Thu Jul 20, 2017 2:28 pm

Link: https://www.thingiverse.com/thing:1713315/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is a model for a three case pulley system. This model will take about 6 hours to print on high speed.
Pulley_Case_3.png

Post Reply