Page 1 of 1

Pulley System

Posted: Thu Jul 20, 2017 1:46 pm
by gyukish
Link: https://www.thingiverse.com/thing:1713315
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is a model for a simple pulley system broken down into multiple components. Please note that the four case pulley system model will not fit on a TAZ 6 or LulzBot Mini 3D printer.
Pulley.jpg

Wheel

Posted: Thu Jul 20, 2017 1:49 pm
by gyukish
Link: https://www.thingiverse.com/thing:1713315/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is the model for the wheel to be used in the pulley system. This model will take about one hour and thirty minutes to complete on high speed.
Wheel.png

Single Case Pulley

Posted: Thu Jul 20, 2017 1:54 pm
by gyukish
Link: https://www.thingiverse.com/thing:1713315/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is a model for a single case pulley system. This model will take about two hours and forty minutes to complete on high speed.
Pulley_Case_1.png

Two Case Pulley

Posted: Thu Jul 20, 2017 2:25 pm
by gyukish
Link: https://www.thingiverse.com/thing:1713315/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is a model for a double case pulley. This model will take about four hours to complete on high speed.
Pulley_Case_2.png

Three Case Pulley

Posted: Thu Jul 20, 2017 2:28 pm
by gyukish
Link: https://www.thingiverse.com/thing:1713315/#files
License: CC BY 3.0
Grade Level: K-6
Courses: Simple Machines, Physics

This is a model for a three case pulley system. This model will take about 6 hours to print on high speed.
Pulley_Case_3.png