Musical Instruments

Link: https://www.thingiverse.com/thing:1735985
License: CC BY 3.0
Grade Level: 5-8
Courses: Music

Here are three models that make up two musical instruments. The first two models are two parts of an Ocarina. The second model is a Pan Flute.
Music.JPG

1 Like

Link: https://www.thingiverse.com/thing:234512/#files
License: CC BY 3.0
Grade Level: 5-8
Courses: Music

This is the first part of the Ocarina model. Be sure to use support with this. This part will take about one hour and forty-five minutes to complete on high speed. Please note that the original model is in inches. When you load the model into Cura it reads the model in millimeters. Instead of the model being 4.2 inches long it reads as 4.2 millimeters long. To fix this simply click on the model, select scale in the lower left, ensure that uniform scaling has been selected, it defaults to this. With uniform scaling on change the scale X from 1 to 25.4. This will scale everything up to the proper dimensions.

Link: https://www.thingiverse.com/thing:234512/#files
License: CC BY 3.0
Grade Level: 5-8
Courses: Music

This is the second part of the Ocarina model. Be sure to use support with this part. This part will take about two hour and twenty minutes to complete on high speed. Please note that the original model is in inches. When you load the model into Cura it reads the model in millimeters. Like with the first part, to fix this simply click on the model, select scale in the lower left, ensure that uniform scaling has been selected, it defaults to this. With uniform scaling on change the scale X from 1 to 25.4. This will scale everything up to the proper dimensions.

Link: https://www.thingiverse.com/thing:1735985/#files
License: CC BY 3.0
Grade Level: 5-8
Courses: Music

This is a model for Pan Pipes. This model will take about three and a half hours to complete on high speed.
Pan_Pipes.png

3d printable trombone
https://www.thingiverse.com/thing:2203566

Someone can help me, in the download list I found an impossible gear, but the file is one piece. Does anyone have this file in separate parts? I need it to print the pieces individually.

Thanks!

I will try to create one as well I hope that it will work fine.

Could you please tell me where I can find maracas in stl format? I found a suitable model here, but it’s not 3D print ready. The support unfortunately says that they will not be able to convert the model to stl format, although they’re doing it for 3d models in other categories. Please let me know if anyone has come across a print-ready maracas, I would be very grateful!

1 Like

The two biggest sites for free 3d models have tons.

https://www.printables.com/search/models?q=maracas

2 Likes