I was wondering if it would be possible to set up two carriages on the x-axis to print two objects at once. The parts I am printing are small enough and it would obviously double my production.
Has anyone seen this done? If so can you point me in the right direction or give me some tips on how to make this work?
Any help is appreciated!
A thread on this using our original tool head can be found here: https://forum.lulzbot.com/t/taz-parallel-printing/402/1
Thank you so much Orias! 
The address has been removed 
http://devel.lulzbot.com/TAZ/Dual_Extruder-TAZ/Dual_Extruder-V0.75/
I’m going to ask about additional info on that thread but if you have any additional info I would really appreciate it.
Here’s the information from the other thread:
Here’s the current directory: > http://devel.lulzbot.com/TAZ/accessories/dual_extruder/parallel_printing/ > You should be able to get the bearing mounts from your sdcard.
There is some really interesting things in the works in there. The Unischnozzle in particular caught my eye