Hey guys,
I’m looking for a spare hex hot end in good condition, preferably with a small nozzle 2-2.5mm. already installed but if the nozzle isn’t jammed and can be removed, then that’s fine.
I’m looking to have a spare hot end for super high res prints… let me know what you have.
What about http://i-t-w.com/parts/lulzbot-taz-hexagon-single-extruder-tool-head-v2 and adding an E3D 0.25mm nozzle? I have a reprap hexagon and added an E3D 0.25mm nozzle on it. It works great.
Seems like much more work to change a hot end that just swap nozzles.
Not when it’s seized…lol
the tool head that was linked looks like a good deal, problem is, they’re sold out. I heard the small nozzles clog though…
For maximum precision when printing small parts, consider trying a Merlin hotend, and providing it a dedicated extruder to use with the LulzBot quick-change bracket.
http://reprap.org/wiki/Merlin_Hotend
http://www.reprapdiscount.com/hotends/59-merlin-hotend-set.html